13th Generation Intel® Core™ Processors | Processor Lines | S / H / HX / P / U | S / HX | S / H / HX / P / U | S / HX | H / P / U | H / P / U /PX | H / P / U /PX |
Configuration | 1DPC | 2DPC 9,11 | 1DPC | 2DPC 7,9,11 | 1R/2R | 1R/2R | 1R/2R |
Maximum Frequency [MT/s] | S: UDIMM 3200 S / HX / H / P / U: SoDIMM 3200 | S: UDIMM 3200 HX : SoDIMM 3200 | S/HX SoDIMM: 1R: 5600 2R: 5200 H/P/U SoDIMM: 1R: 5200 2R: 5200 S : UDIMM 1R: 5600 2R: 5200 | S UDIMM: 1 DIMM - 4400 2 DIMMs 1R - 4000 2 DIMMs 2R - 3600 HX SoDIMM: 1 DIMM - 4000 2 DIMMs 1R - 4000 2 DIMMs 2R - 3600 | 4266 | H/P/U Type4: 1R: 6400 2R: 6000 H/P/U Type317: 1R: 4800 2R: 4800 PX Type4: 1R: 6400 2R: 600014 | H/P/U Type4: 1R: 6400 2R: 6000 H/P/U Type317: 1R: 4800 2R: 4800 PX Type4: 1R: 6400 2R: 600014 |
Intel® Xeon® E-2400 Processors | Processor Lines | | | E | E | | | |
Configuration | | | 1DPC | 2DPC 7,9,11 | | | |
Maximum Frequency [MT/s] | | | UDIMM 4800 | UDIMM: 1 DIMM - 4400 2 DIMMs 1R - 4000 2 DIMMs 2R - 3600 | | | |
Intel® Core™ 14th Generation Processors | Processor Lines | S Refresh / HX Refresh/ U Refresh | S Refresh / HX Refresh | S Refresh / HX Refresh / U Refresh | S Refresh / HX Refresh | | U Refresh | U Refresh |
Configuration | 1DPC | 2DPC 9,11 | 1DPC | 2DPC 7,9,11 | | 1R/2R | 1R/2R |
Maximum Frequency [MT/s] | S Refresh : UDIMM 3200 S Refresh / HX Refresh / U Refresh: SoDIMM 3200 | S Refresh : UDIMM 3200 HX Refresh: SoDIMM 3200 | S Refresh /HX Refresh SoDIMM: 1R: 5600 2R: 5600 U Refresh SoDIMM: 1R: 5200 2R: 5200 S Refresh : UDIMM 1R: 5600 2R: 5600 | S Refresh UDIMM: 1 DIMM - 4400 2 DIMMs 1R - 4000 2 DIMMs 2R - 3600 HX Refresh SoDIMM: 1 DIMM - 4400 2 DIMMs 1R - 4400 2 DIMMs 2R - 4000 | | U Refresh Type4: 1R: 6400 2R: 6000 U Refresh Type3: 1R: 5200 2R: 4800 | U Refresh Type4: 1R: 6400 2R: 6400 U Refresh Type3: 1R: 5200 2R: 5200 |
| | | | | | | | |
| VDDQ [V] 5 | 1.2 | 5,1.19 | 0.6 | 0.5 | 0.5 |
| VDD2 [V] 5 | 1.2 | 1.1 | 1.1 | 1.05 | 1.05 |
| Maximum RPC 2 | 2 | 4 | 2 | 4 | 2 | 2 | 2 |
| Die Density [Gb] | 8,16 | 8,16 | 16 , 2415 | 8,16 | 8, 12 ,16 | 8, 12 ,16 |
| Ballmap Mode 10 | IL /NIL | IL /NIL | P : NIL, S LGA - IL | NIL | NIL | NIL | NIL |
| - 1DPC refer to system with one DIMM slot routed per 64-bit channel, 2DPC refer to system with two DIMM slots routed per 64-bit channel.
- RPC = Rank Per Channel.
- Memory down of all technologies should be implemented homogeneous means that all DRAM devices should be from the same vendor and have the same part number. Implementing a mix of DRAM devices may cause serious signal integrity and functional issues.
- There is no support for memory modules with different technologies or capacities on opposite sides of the same memory module. If one side of a memory module is populated, the other side is either identical or empty.
- VDD2 is Processor DRAM voltage; VDDQ is DRAM voltage.
- DDR5 2R 5600 is pending Intel enablement.
-
Maximum 2DPC frequency supported when same DIMM part number populated Within channel. Frequency is not guaranteed when mix DIMM's populated.. - DDR5 5V is SODIMM/UDIMM voltage, 1.1V is Memory down voltage.
- DDR4/DDR5 SoDIMM 2DPC Is not for S/S Refresh/E-Processor Line.
- L/NIL mode depends on Memory topology
-
Far memory slot to be populated, in case, single DIMM is placed on 2DPC channel. -
DDR4/DDR5 ECC is supported only when all populated memory modules in system are support ECC, ECC supported by specific S/S Refresh/E-Processor Line HX/HX Refresh SKUs. -
LPDDR5 technology supports 8 Bank Mode, BG (Bank Group) Mode and 16 Bank Mode.LPDDR5x technology supports BG Mode and 16 Bank Mode, according to JEDEC spec. The Processor supports BG Mode and 16 Bank Mode. Bank Mode may vary according to SAGV Point. - LPDDR5 2R 6400MT/s is pending Intel enablement.
- DDR5 24Gb die density is POR post TTM.
- S/S Refresh-DDR5 8+8/6+0 DDR5 speed follows Gen 12 DDR5 speeds. HX 8+8 DDR5 speed follows Gen12 8+8 DDR5 speeds
|