600 Series Chipset Family Platform Controller Hub
Datasheet, Volume 1 of 2
ID | Date | Version | Classification |
---|---|---|---|
648364 | 05/10/2022 | Public |
Legal Disclaimer
Revision History
Introduction
PCH Controller Device IDs
Memory Mapping
System Management
High Precision Event Timer (HPET)
PCH Thermal Sensor
Power Delivery
Pin Straps
Electrical and Thermal Characteristics
Ballout Definition
8254 Timers
Audio Voice and Speech
Controller Link
Processor Sideband Signals
Digital Display Signals
Enhanced Serial Peripheral Interface (eSPI)
General Purpose Input and Output
Intel® Serial I/O Inter-Integrated Circuit (I2C) Controllers
Gigabit Ethernet Controller
Integrated Sensor Hub (ISH)
PCH and System Clocks
PCI Express* (PCIe*)
Power Management
Real Time Clock (RTC)
Serial ATA (SATA)
System Management Interface and SMLink
Host System Management Bus (SMBus) Controller
Serial Peripheral Interface (SPI)
Intel® Serial IO Generic SPI (GSPI) Controllers
Testability
Intel® Serial I/O Universal Asynchronous Receiver/Transmitter (UART) Controllers
Universal Serial Bus (USB)
Connectivity Integrated (CNVi)
GPIO Serial Expander
Direct Media Interface
Private Configuration Space Target Port ID
Miscellaneous Signals
Functional Description
Configurable GPIO Voltage
GPIO Buffer Impedance Compensation
Interrupt / IRQ via GPIO Requirement
Programmable Hardware Debouncer
Integrated Pull-ups and Pull-downs
SCI / SMI# and NMI
Timed GPIO
GPIO Blink (BK) and Serial Blink (SBK)
GPIO Ownership
Native Function and TERM Bit Setting
Functional Description
Interrupt Generation
PCI Express* Power Management
Dynamic Link Throttling
Port 8xh Decode
Separate Reference Clock with Independent SSC (SRIS)
Advanced Error Reporting
Single - Root I/O Virtualization (SR - IOV)
SERR# Generation
Hot - Plug
PCI Express* Lane Polarity Inversion
Precision Time Measurement (PTM)
Functional Description
PROCPWRGD out to the processor indicates that the primary power is ramped up and stable. PROCPWRGD will be undriven by the PCH (high Z) when RSMRST# is asserted and driven high after RSMRST# is de-asserted.
If THRMTRIP# goes active, the processor is indicating an overheat condition, and the PCH will immediately transition to an S5 state. CPU_GP can be used from external sensors for the thermal management.
PM_SYNC is used to provide early warning to the processor that a global reset is in progress and that the memory contents should be saved and placed into self refresh.
PM_DOWN is input to PCH indicates the processor wake up event.