Thermal Trip Signal (PCHHOT#)

Legal Disclaimer
Revision History
Introduction and SKU Definition
PCH Controller Device IDs
- Device and Revision ID Table
Memory Mapping
- Functional Description
- Memory Map
  - Boot Block Update Scheme
System Management
- Theory of Operation
  - Handling an Intruder
  - TCO Modes
High Precision Event Timer (HPET)
- Features Supported
PCH Thermal Sensor
Power Delivery
- Power and Ground Signals
- FIVR
Pin Straps
Electrical and Thermal Characteristics
8254 Timers
- Timer Programming
- Reading from the Interval Timer
Audio Voice and Speech
Controller Link
Processor Sideband Signals
Digital Display Signals
Enhanced Serial Peripheral Interface eSPI
General Purpose Input and Output
- Signal Description
- Functional Description
Intel® Serial I/O Inter-Integrated Circuit (I2C) Controllers
Gigabit Ethernet Controller
Integrated Sensor Hub (ISH)
PCH and System Clocks
PCI Express* (PCIe*)
Power Management
Real Time Clock (RTC)
- Signal Description
- I/O Signal Planes and States
Serial ATA (SATA)
System Management Interface and SMLink
Host System Management Bus (SMBus) Controller
Serial Peripheral Interface (SPI)
Touch Host Controller (THC)
Intel® Serial IO Generic SPI (GSPI) Controllers
Testability
Intel® Serial I/O Universal Asynchronous Receiver/Transmitter (UART) Controllers
Universal Serial Bus (USB)
Connectivity Integrated (CNVi)
GPIO Serial Expander
Private Configuration Space Target Port ID
Miscellaneous Signals

The PCH provides PCHHOT# signal to indicate that it has exceeded some temperature limit. The limit is set by BIOS. The temperature limit (programmed into the PHLC register) is compared to the present temperature. If the present temperature is greater than the PHLC value then the pin is asserted.

PCHHOT# is an O/D output and requires a Pull-up on the motherboard.

The PCH evaluates the temperature from the thermal sensor against the programmed temperature limit every 1 second.

Power Delivery

Thermal Reporting to an EC Power Delivery