Intel® Ethernet Adapters and Devices User Guide
ID
705831
Date
06/24/2024
Public
Device Features
Adapter Teaming
Adaptive Inter-Frame Spacing
Data Center Bridging (DCB)
Direct Memory Access (DMA) Coalescing
Dynamic Device Personalization (DDP)
Firmware
Firmware Link Layer Discovery Protocol (FW-LLDP)
Flow Control
Forward Error Correction (FEC) Mode
Gigabit PHY Mode
Intel® Ethernet Flow Director
Interrupt Moderation Rate
Jumbo Frames
Link State on Interface Down
Locally Administered Address
Log Link State Event
Low Latency Interrupts
Malicious Driver Detection (MDD) for VFs
Max Number of RSS Queues Per Vport
Offloads
Performance Options
Power Options
Priority and VLAN Tagging
Quality of Service
Receive Buffers
Receive Side Scaling
Remote Boot
Remote Direct Memory Access (RDMA)
Accessing Remote NVM Express* Drives Using RDMA
Setting Speed and Duplex
Thermal Monitoring
Timestamps
Transmit Buffers
UEFI Network Device Drivers
VF Loopback Pacing
Virtualization Support
Virtual LANs (VLANs)
Wait for Link
Tools & Apps
Installing and Uninstalling Intel® Network Connection Tools
Intel® Ethernet Flash Firmware Utility
Intel® Dynamic Device Personalization Tool
Intel® DIAGS
Ethernet Port Configuration Tool (EPCT)
Intel® Ethernet NVM Update Tool
NVM Update Reference Application (NVM URA) for Intel® Ethernet
NVM Update Package
About Intel PROSet®
About Intel PROSet®
About Intel® Ethernet Cmdlets
Compatibility Notes for Intel Ethernet Cmdlets and Intel PROSet
Installing Intel Ethernet Cmdlets
Installing Intel PROSet
Configuring Features with Windows PowerShell
Configuring Features with Intel PROSet Adapter Configuration Utility
Configuring Features with Intel PROSet for Windows Device Manager
Changing Intel Ethernet Settings Under Windows Server Core
Diagnostics in Intel PROSet
Diagnostics in Ethernet Cmdlets
Possible Misconfiguration of the Ethernet Port
You may see an informational message stating that a potential misconfiguration of the Ethernet port was detected. This is to alert you that your device is being underutilized. If this was intentional, you may ignore this message.
For example, setting your Intel® Ethernet Network Adapter E810-C-Q2 adapter to 2x2x25 is valid, but it does not use the full capabilities of the device. If you see this message and the configuration was not intentional, you may use the Ethernet Port Configuration Tool (EPCT) to correct the configuration. See Ethernet Port Configuration Tool (EPCT) for more information on this tool.