13th Generation Intel® Core™, Intel® Core™ 14th Generation, Intel® Core™ Processor (Series 1) and (Series 2), Intel® Xeon™ E 2400 Processor and Intel® Xeon™ 6300 Processor
Datasheet, Volume 1 of 2
Supporting 13th Generation Intel® Core™ Processor for S, H, P, HX, and U Processor Line Platforms, formerly known as Raptor Lake.
Supporting Intel® Core™ 14th Generation Processor for S, HX formerly known As Raptor Lake Refresh.
Supporting Intel® Core™ Processor (Series 1) for U Processor Line Platform, formerly known As Raptor Lake refresh
Supporting Intel® Core™ Processor (Series 2) for H Processor Line Platform, formerly known As Raptor Lake Refresh.
Supporting Intel® Xeon® E 2400 Processor and Intel® Xeon® 6300 Processor, formerly known As Raptor Lake–E Refresh
| ID | Date | Version | Classification |
|---|---|---|---|
| 743844 | 05/30/2025 | Public |
Legal Disclaimer
Revision History
Introduction
Technologies
Power Management
Thermal Management
Memory
USB-C* Sub System
PCIe* Interface
Direct Media Interface and On Package Interface
Graphics
Display
Camera/MIPI
Signal Description
Electrical Specifications
Package Mechanical Specifications
CPU And Device IDs
Security Technologies
Intel® Trusted Execution Technology
Intel® Advanced Encryption Standard New Instructions
Perform Carry-Less Multiplication Quad Word Instruction
Intel® Secure Key
Execute Disable Bit
Boot Guard Technology
Intel® Supervisor Mode Execution Protection
Intel® Supervisor Mode Access Protection
Intel® Secure Hash Algorithm Extensions
User Mode Instruction Prevention
Read Processor ID
Intel® Total Memory Encryption - Multi-Key
Intel® Control-flow Enforcement Technology
KeyLocker Technology
Devil’s Gate Rock
Power and Performance Technologies
Intel® Smart Cache Technology
IA Cores Level 1 and Level 2 Caches
Ring Interconnect
Intel® Performance Hybrid Architecture
Intel® Turbo Boost Max Technology 3.0
Power Aware Interrupt Routing (PAIR)
Intel® Hyper-Threading Technology
Intel® Turbo Boost Technology 2.0
Enhanced Intel SpeedStep® Technology
Intel® Thermal Velocity Boost (Intel® TVB)
Intel® Speed Shift Technology
Intel® Advanced Vector Extensions 2 (Intel® AVX2)
Intel® 64 Architecture x2APIC
Intel® Dynamic Tuning Technology
Intel® GMM and Neural Network Accelerator
Cache Line Write Back
Remote Action Request
User Mode Wait Instructions
Intel® Adaptive Boost Technology
Power Management
Advanced Configuration and Power Interface (ACPI) States Supported
Processor IA Core Power Management
Processor AUX Power Management
Processor Graphics Power Management
System Agent Enhanced Intel SpeedStep® Technology
Rest Of Platform (ROP) PMIC
PCI Express* Power Management
TCSS Power State
Thermal Management Features
Adaptive Thermal Monitor
Digital Thermal Sensor
PROCHOT# Signal
PROCHOT Output Only
Bi-Directional PROCHOT#
PROCHOT Demotion Algorithm
Voltage Regulator Protection using PROCHOT#
Thermal Solution Design and PROCHOT# Behavior
Low-Power States and PROCHOT# Behavior
THRMTRIP# Signal
Critical Temperature Detection
On-Demand Mode
MSR Based On-Demand Mode
I/O Emulation-Based On-Demand Mode
System Memory Interface
Processor SKU Support Matrix
Supported Memory Modules and Devices
System Memory Timing Support
Memory Controller (MC)
Memory Controller Power Gate
System Memory Controller Organization Mode (DDR4/5 Only)
System Memory Frequency
Technology Enhancements of Intel® FMA
Data Scrambling
ECC H-Matrix Syndrome Codes
Data Swapping
LPDDR5/x Ascending and Descending
LPDDR4x CMD Mirroring
DDR I/O Interleaving
DRAM Clock Generation
DRAM Reference Voltage Generation
Data Swizzling
Error Correction With Standard RAM
Post Package Repair
Refresh Management (RFM)
Signal Description
System Memory Interface
PCI Express* Graphics (PEG) Signals
Direct Media Interface (DMI) Signals
Reset and Miscellaneous Signals
Display Interfaces
USB Type-C Signals
MIPI CSI 2 Interface Signals
Processor Clocking Signals
Testability and Monitoring Signals
Error and Thermal Protection Signals
Processor Power Rails
Ground and Reserved Signals
Processor Internal Pull-Up / Pull- Down on Package
Processor Interfaces DC Specifications
DDR4 DC Specifications
DDR5 DC Specifications
LPDDR4x DC Specification
LPDDR5/x DC Specification
PCIe* DC and Timing Specifications
PCI Express* Graphics (PEG) Group DC Specifications
Digital Display Interface (DDI) DC Specifications
CMOS DC Specifications
GTL and OD DC Specification
PECI DC Characteristics
DRAM I/O Power Management
Unused signals should be disabled to save power and reduce electromagnetic interference. This includes all signals associated with an unused memory channel. Clocks, CKE, ODT, and CS signals are controlled per DIMM rank and will be powered down for unused ranks.
The I/O buffer for an unused signal should be tri-stated (output driver disabled), the input receiver (differential sense-amp) should be disabled. The input path should be gated to prevent spurious results due to noise on the unused signals (typically handled automatically when input receiver is disabled).