Vcc1P8_PROC DC Specifications - 015 - ID:743844 | 13th Generation Intel® Core™, Intel® Core™ 14th Generation, Intel® Core™ Processor (Series 1) and (Series 2), Intel® Xeon™ E 2400 Processor and Intel® Xeon™ 6300 Processor

13th Generation Intel® Core™, Intel® Core™ 14th Generation, Intel® Core™ Processor (Series 1) and (Series 2), Intel® Xeon™ E 2400 Processor and Intel® Xeon™ 6300 Processor

Datasheet, Volume 1 of 2
Supporting 13th Generation Intel® Core™ Processor for S, H, P, HX, and U Processor Line Platforms, formerly known as Raptor Lake.
Supporting Intel® Core™ 14th Generation Processor for S, HX formerly known As Raptor Lake Refresh.
Supporting Intel® Core™ Processor (Series 1) for U Processor Line Platform, formerly known As Raptor Lake refresh
Supporting Intel® Core™ Processor (Series 2) for H Processor Line Platform, formerly known As Raptor Lake Refresh.
Supporting Intel® Xeon® E 2400 Processor and Intel® Xeon® 6300 Processor, formerly known As Raptor Lake–E Refresh

ID	Date	Version	Classification
743844	05/30/2025		Public

Vcc1P8_PROC DC Specifications

Vcc_{1P8_PROC} Supply DC Voltage and Current Specifications

Symbol	Parameter	Segment	Minimum	Typical	Maximum	Units	Notes ^1,2,5
Vcc_{1P8_PROC}	Processor Power Rail voltage support PCIe (PHY)	S/S Refresh/E/E Refresh /P/PX/H/U/U Refresh/H Refresh Processor Lines	—	1.8	—	V	3
Vcc_{1P8_PROC}	Processor Power Rail voltage support PCIe (PHY)	HX/HX Refresh Processor Lines	—	1.8	—	V	3
TOB_{1P8_PROC}	Vcc_{1P8_PROC} Tolerance	All Processor Lines	± 4			%	3,5
AC Noise	AC Noise	All Processor Lines	—	—	+/-15 Frequency range from 1KHz Up to 10MHz +/-5 Frequency range Above 10MHz	mV	6
Icc_{MAX_1P8_PROC}	Maximum Current for Vcc_{1P8_PROC}	P/H/PX/U/U Refresh/H Refresh-Processor Lines	—	—	100	mA	4
Icc_{MAX_1P8_PROC}	Maximum Current for Vcc_{1P8_PROC}	S/S Refresh/E/E Refresh -Processor Line	—	—	106	mA	4
Icc_{MAX_1P8_PROC}	Maximum Current for Vcc_{1P8_PROC}	HX/HX Refresh-Processor Line	—	—	140	mA	4
Notes: All specifications in this table are based on estimates and simulations or empirical data. These specifications will be updated with characterized data from silicon measurements at a later date. Long term reliability cannot be assured in conditions above or below Maximum/Minimum functional limits. The voltage specification requirements are measured on capacitors pads near to the package, with an oscilloscope set to 100 MHz bandwidth, 1.5 pF maximum probe capacitance, and 1 MΩ minimum impedance. The maximum length of ground wire on the probe should be less than 5 mm. Ensure external noise from the system is not coupled into the oscilloscope probe. Vcc_{1P8_PROC} power rail may be named in different document as Vcc_{1P8_CPU} For S-process line, AC noise spec include VR self generated noise or input source AC noise that passes through to VR output and droop/overshoot due to transient load.