15

0x0

RW/1C/V

Detected Parity Error (DPE)

Set when the root port receives a command or data from the backbone with a parity error. This is set even if PCMD.PERE is not set.

14

0x0

RW/1C/V

Signaled System Error (SSE)

Set when the root port signals a system error to the internal SERR# logic.

13

0x0

RW/1C/V

Received Master Abort (RMA)

Set when the root port receives a completion with unsupported request status from the backbone.

12

0x0

RW/1C/V

Received Target Abort (RTA)

Set when the root port receives a completion with completer abort from the backbone.

11

0x0

RW/1C/V

Signaled Target Abort (STA)

Set whenever the root port forwards a target abort received from the downstream device onto the backbone.

10:9

0x0

RO

Primary DEVSEL# Timing Status (PDTS)

Reserved per PCI-Express spec

8

0x0

RW/1C/V

Master Data Parity Error Detected (DPD)

Set when the root port receives a completion with a data parity error on the backbone and PCMD.PERE is set.

7

0x0

RO

Primary Fast Back to Back Capable (PFBC)

Reserved per PCI-Express spec.

6

0h

RO

Reserved

5

0x0

RO

Primary 66 MHz Capable (PC66)

Reserved per PCI-Express spec.

4

0x1

RO

Capabilities List (CLIST)

Indicates the presence of a capabilities list.

3

0x0

RO/V

Interrupt Status (IS)

Indicates status of hot plug and power management interrupts on the root port that result in INTx# message generation. This bit is not set if MSI is enabled. If MSI is not enabled, this bit is set regardless of the state of CMD.ID.

2:0

0h

RO

Reserved