31

0x0

RW/L

(LOCKED)

When set, this entire register becomes read-only.

30:24

0x0

RO/V

TjMax Tcc Offset (TJ_​MAX_​TCC_​OFFSET)

Temperature offset in degrees (C) from the TjMax. Used for throttling temperature.
Will not impact temperature reading.
If offset is allowed and set, the throttle will occur and reported at lower then TjMax.

23:16

0x0

RO/V

Thermal Junction Maximum Temperature (REF_​TEMP)

This field indicates the maximum junction temperature, also referred to as the Throttle
Temperature, TCC Activation Temperature or Prochot Temperature. This is the temperature at which the Adaptive Thermal Monitor is activated.

15:8

0x0

RO/V

Fan Temperature Offset (FAN_​TEMP_​TARGET_​OFST)

Fan Temperature Target Offset (a.k.a. T-Control) indicates the relative offset from the Thermal Monitor Trip Temperature at which fans should be engaged.

7

0x0

RO/V

Tcc Offset Clamping Bit (TCC_​OFFSET_​CLAMPING_​BIT)

When enabled will allow RATL throttling below P1

6:0

0x0

RO/V

Tcc Offset Time Window (TCC_​OFFSET_​TIME_​WINDOW)

Describes the RATL averaging time window