Power Management Control/Status (PM_CS_MMIO) – Offset 8674 - 1.3 - ID:767625 | 12th Generation Intel® Core™ Processors Datasheet Volume 2 of 2

12th Generation Intel® Core™ Processors Datasheet Volume 2 of 2

ID	Date	Version	Classification
767625	07/13/2023		Public

Power Management Control/Status (PM_CS_MMIO) – Offset 8674

Mirror of physical register as PM_CS

Bit Range	Default	Access	Field Name and Description
15	0x0	RW/1C	PME Status (PME_STATUS) This bit is set when the Intel PCH XHC would normally assert the PME# signal independent of the state of the PME_En bit. Writing a 1 to this bit will clear it and cause the internal PME to deassert (if enabled). Writing a 0 has no effect. This bit must be explicitly cleared by the operating system each time the operating system is loaded.
14:13	0x0	RO	Data Scale (DATA_SCALE) The Intel PCH hardwires these bits to 00 because it does not support the associated Data register.
12:9	0x0	RO	Data Select (DATA_SELECT) The Intel PCH hardwires these bits to 0000 because it does not support the associated Data register.
8	0x0	RW	PME Enable (PME_EN) A 1 enables the Intel PCH XHC to generate an internal PME signal when PME_Status is 1. This bit must be explicitly cleared by the operating system each time it is initially loaded.
7:4	0x0	RO	Reserved (RSVD) Reserved
3	0x1	RW/L	No Soft Reset (NSR) No_Soft_Reset - When set ("1"), this bit indicates that devices transitioning from D3hot to D0 because of PowerState commands do not perform an internal reset. Configuration Context is preserved. Upon transition from the D3hot to the D0 Initialized state, no additional operating system intervention is required to preserve Configuration Context beyond writing the PowerState bits. Transition from D3hot to D0 by a system or bus segment reset will return to the device state D0 Uninitialized with only PME context preserved if PME is supported and enabled.
2	0x0	RO	Reserved (RSVD2) Reserved
1:0	0x0	RW	Power State (POWERSTATE) This 2-bit field is used both to determine the current power state of XHC function and to set a new power state. The definition of the field values are: 00b - D0 state 11b - D3hot state If software attempts to write a value of 10b or 01b in to this field, the write operation must complete normally, however, the data is discarded and no state change occurs. When in the D3hot state, the Intel PCH must not accept accesses to the XHC memory range, but the configuration space must still be accessible.