FIFO Control (FCR) – Offset 8 - 001 - ID:834576 | Intel® 800 Series Chipset Family Platform Controller Hub (PCH), Volume 2

Introduction
CNVi WiFi* PCI Configuration
eSPI PCI Configuration
eSPI PCR
GPIO Commumity 0
GPIO Commumity 1
GPIO Commumity 2
GPIO Commumity 3
GPIO Commumity 4
GPIO Commumity 5
GSPI Additional MMIO
GSPI DMA
GSPI MMIO
GSPI PCI Configuration
I2C Additional MMIO
I2C DMA
I2C MMIO
I3C / I2C / UART / GSPI PCR
I3C Additional MMIO
I3C DMA
I3C MMIO
I3C PCI Configuration
IDE-Redirect (IDE-R) PCI Configuration
Integrated GbE PCI Configuration
Integrated Sensor Hub (ISH) MMIO
Integrated Sensor Hub (ISH) PCI Configuration
Intel(R) Management Engine Interface (MEI) MMIO
Intel(R) Management Engine Interface (MEI) PCI Configuration
Intel® High Definition Audio MMIO
Intel® High Definition Audio PCI Configuration
Intergrated GbE MMIO
Keyboard and Text (KT) PCI Configuration
P2SB PCI Configuration
PCIe* PCI Configuration
PMC I/O Based
PMC MMIO
PMC PCI Configuration
PMC SSRAM PCI Configuration
RTC Index
RTC PCR
SATA ABAR
SATA AIDPBA
- AHCI Index Register (INDEX)
- AHCI Data Register (DATA)
SATA Initialization (SIR) Index
SATA MXPBA
- MSI-X Pending Bit Array QW 0 (MXPQW0_DW0)
- MSI-X Pending Bit Array QW 1 (MXPQW0_DW1)
SATA MXTBA
SATA PCI Configuration
SATA Port 0 ABAR
SATA Port 1 ABAR
SATA Port 2 ABAR
SATA Port 3 ABAR
SATA Port 4 ABAR
SATA Port 5 ABAR
SATA Port 6 ABAR
SATA Port 7 ABAR
SMBus MMIO and I/O
SMBus PCI Configuration
SMBus PCR
SMBus TCO I/O
SPI MMIO
SPI PCI Configuration
THC MMIO Common
- Device Idle Control Register (THC_M_CMN_DEVIDLECTRL)
- THC LTR Control Register (THC_M_CMN_LTR_CTRL)
THC MMIO Port
THC PCI Configuration
UART Additional MMIO
UART DMA
UART MMIO
UART PCI Configuration
USB MMIO
USB PCI Configuration
xDCI MMIO Device
xDCI MMIO Global
xDCI PCI Configuration

FIFO Control (FCR) – Offset 8

Bit Range	Default	Access	Field Name and Description
31:8	0h	NA	Res_31_8 (Res_31_8) Reserved
7:6	0h	WO	RCVR Trigger (RCVR) RCVR Trigger. This is used to select the trigger level in the receiver FIFO at which the Received Data Available Interrupt is generated. The following trigger levels are supported: 00 = 1 character in the FIFO 01 = FIFO 1/4 full 10 = FIFO 1/2 full 11 = FIFO 2 less than full
5:4	0h	WO	TX Empty Trigger (TET) TX Empty Trigger. This is used to select the empty threshold level at which the THRE Interrupts are generated when the mode is active. The following trigger levels are supported: 00 = FIFO empty 01 = 2 characters in the FIFO 10 = FIFO 1/4 full 11 = FIFO 1/2 full
3	0h	WO	RSVD (DMAM) Reserved
2	0h	WO	Transmit FIFO Reset (XFIFOR) XMIT FIFO Reset. This resets the control portion of the transmit FIFO and treatsthe FIFO as empty. Note that this bit is 'self-clearing'. It is not necessary to clear this bit.
1	0h	WO	RCVR FIFO Reset (RFIFOR) RCVR FIFO Reset. This resets the control portion of the receive FIFO and treats the FIFO as empty. Note that this bit is 'self-clearing'. It is not necessary to clear this bit.
0	1h	WO	FIFO Enable (FIFOE) FIFO Enable. This enables/disables the transmit (XMIT) and receive (RCVR) FIFOs. Whenever the value of this bit is changed both the XMIT and RCVR controller portion of FIFOs is reset.

Interrupt Control (IIR)

Divisor Latch High (DLH) Interrupt Control (IIR)

Select Your Language

Using Intel.com Search

Quick Links

Recent Searches

Advanced Search

Only search in

Intel® 800 Series Chipset Family Platform Controller Hub (PCH), Volume 2

FIFO Control (FCR) – Offset 8