GPI Interrupt Enable (GPI_IE_GPP_I_0) – Offset 220 - 001 - ID:834576 | Intel® 800 Series Chipset Family Platform Controller Hub (PCH), Volume 2

Introduction
CNVi WiFi* PCI Configuration
eSPI PCI Configuration
eSPI PCR
GPIO Commumity 0
GPIO Commumity 1
GPIO Commumity 2
GPIO Commumity 3
GPIO Commumity 4
GPIO Commumity 5
GSPI Additional MMIO
GSPI DMA
GSPI MMIO
GSPI PCI Configuration
I2C Additional MMIO
I2C DMA
I2C MMIO
I3C / I2C / UART / GSPI PCR
I3C Additional MMIO
I3C DMA
I3C MMIO
I3C PCI Configuration
IDE-Redirect (IDE-R) PCI Configuration
Integrated GbE PCI Configuration
Integrated Sensor Hub (ISH) MMIO
Integrated Sensor Hub (ISH) PCI Configuration
Intel(R) Management Engine Interface (MEI) MMIO
Intel(R) Management Engine Interface (MEI) PCI Configuration
Intel® High Definition Audio MMIO
Intel® High Definition Audio PCI Configuration
Intergrated GbE MMIO
Keyboard and Text (KT) PCI Configuration
P2SB PCI Configuration
PCIe* PCI Configuration
PMC I/O Based
PMC MMIO
PMC PCI Configuration
PMC SSRAM PCI Configuration
RTC Index
RTC PCR
SATA ABAR
SATA AIDPBA
- AHCI Index Register (INDEX)
- AHCI Data Register (DATA)
SATA Initialization (SIR) Index
SATA MXPBA
- MSI-X Pending Bit Array QW 0 (MXPQW0_DW0)
- MSI-X Pending Bit Array QW 1 (MXPQW0_DW1)
SATA MXTBA
SATA PCI Configuration
SATA Port 0 ABAR
SATA Port 1 ABAR
SATA Port 2 ABAR
SATA Port 3 ABAR
SATA Port 4 ABAR
SATA Port 5 ABAR
SATA Port 6 ABAR
SATA Port 7 ABAR
SMBus MMIO and I/O
SMBus PCI Configuration
SMBus PCR
SMBus TCO I/O
SPI MMIO
SPI PCI Configuration
THC MMIO Common
- Device Idle Control Register (THC_M_CMN_DEVIDLECTRL)
- THC LTR Control Register (THC_M_CMN_LTR_CTRL)
THC MMIO Port
THC PCI Configuration
UART Additional MMIO
UART DMA
UART MMIO
UART PCI Configuration
USB MMIO
USB PCI Configuration
xDCI MMIO Device
xDCI MMIO Global
xDCI PCI Configuration

GPI Interrupt Enable (GPI_IE_GPP_I_0) – Offset 220

Bit Range	Default	Access	Field Name and Description
31:21	0h	RO	Reserved (RSVD_0) Reserved
20:17	0h	RO	Reserved
16	0h	RO	GPI Interrupt Enable (GPI_INT_EN_GPP_I_16) Same description as bit 0.
15	0h	RW	GPI Interrupt Enable (GPI_INT_EN_GPP_I_15) Same description as bit 0.
14	0h	RW	GPI Interrupt Enable (GPI_INT_EN_GPP_I_14) Same description as bit 0.
13	0h	RW	GPI Interrupt Enable (GPI_INT_EN_GPP_I_13) Same description as bit 0.
12	0h	RW	GPI Interrupt Enable (GPI_INT_EN_GPP_I_12) Same description as bit 0.
11	0h	RW	GPI Interrupt Enable (GPI_INT_EN_GPP_I_11) Same description as bit 0.
10	0h	RW	GPI Interrupt Enable (GPI_INT_EN_GPP_I_10) Same description as bit 0.
9	0h	RW	GPI Interrupt Enable (GPI_INT_EN_GPP_I_9) Same description as bit 0.
8	0h	RW	GPI Interrupt Enable (GPI_INT_EN_GPP_I_8) Same description as bit 0.
7	0h	RW	GPI Interrupt Enable (GPI_INT_EN_GPP_I_7) Same description as bit 0.
6	0h	RW	GPI Interrupt Enable (GPI_INT_EN_GPP_I_6) Same description as bit 0.
5	0h	RW	GPI Interrupt Enable (GPI_INT_EN_GPP_I_5) Same description as bit 0.
4	0h	RW	GPI Interrupt Enable (GPI_INT_EN_GPP_I_4) Same description as bit 0.
3	0h	RW	GPI Interrupt Enable (GPI_INT_EN_GPP_I_3) Same description as bit 0.
2	0h	RW	GPI Interrupt Enable (GPI_INT_EN_GPP_I_2) Same description as bit 0.
1	0h	RW	GPI Interrupt Enable (GPI_INT_EN_GPP_I_1) Same description as bit 0.
0	0h	RW	GPI Interrupt Enable (GPI_INT_EN_GPP_I_0) This bit is used to enable/disable the generation of APIC interrupt when the corresponding GPI_INT_STS bit is set. 0 = disable interrupt generation 1 = enable interrupt generation Refer to GPI_IRQ_ROUTE for host GPIO Driver Mode interrupt routing.

GPI General Purpose Events Status (GPI_GPE_STS_GPP_I_0)

GPI Interrupt Status (GPI_IS_GPP_I_0) GPI General Purpose Events Status (GPI_GPE_STS_GPP_I_0)