Interrupt Information (INTR) – Offset 3c - 001 - ID:834823 | Intel® Core™ Ultra 200S and 200HX Series Processors IOE-P I/O Registers

Bit Range	Default	Access	Field Name and Description
15:8	1h	RO/V	Interrupt Pin (IPIN) Indicates the interrupt pin driven by the root port. At reset, this register takes on the following values, which reflect the reset state of the STRPFUSECFG.PxIP field: Port Bits[15:12] Bits[11:08] 1 0h STRPFUSECFG.P1IP 2 0h STRPFUSECFG.P2IP 3 0h STRPFUSECFG.P3IP : : X 0h STRPFUSECFG.PxIP The value that is programmed into STRPFUSECFG.PxIP is always reflected in this register. For PCI Bus Emulation Mode compatibility, if the PCIBEM register is set, this register returns a value of 00h when read, else this register returns the value from the table above. Note: Depending on the platform, the number of Root Ports supported may vary. In this case, the encodings defined in this register will be scaled accordingly.
7:0	0h	RO	Reserved

Bit Range

Default

Access

Field Name and Description

15:8

RO/V

Interrupt Pin (IPIN)

Indicates the interrupt pin driven by the root port. At reset, this register takes on the following values, which reflect the reset state of the STRPFUSECFG.PxIP field:

Port Bits[15:12] Bits[11:08]

1 0h STRPFUSECFG.P1IP

2 0h STRPFUSECFG.P2IP

3 0h STRPFUSECFG.P3IP

:

:

X 0h STRPFUSECFG.PxIP

The value that is programmed into STRPFUSECFG.PxIP is always reflected in this register.

For PCI Bus Emulation Mode compatibility, if the PCIBEM register is set, this register returns a value of 00h when read, else this register returns the value from the table above.

Note: Depending on the platform, the number of Root Ports supported may vary. In this case, the encodings defined in this register will be scaled accordingly.

7:0

Reserved

Bridge Control (BCTRL)

Capabilities List Pointer (CAPP) Bridge Control (BCTRL)