| - 1DPC refer to when only 1DIMM slot per channel is routed.
- RPC = Rank Per Channel
- Memory down of all technologies should be implemented homogeneous means that all DRAM devices should be from the same vendor and have the same part number. Implementing a mix of DRAM devices may cause serious signal integrity and functional issues.
- There is no support for memory modules with different technologies or capacities on opposite sides of the same memory module. If one side of a memory module is populated, the other side is either identical or empty.
- VDD2 is Processor and DRAM voltage, and VDDQ is DRAM voltage.
- Pending DRAM samples availability.
-
Maximum 2DPC frequency supported when same DIMM part number populated Within channel. Frequency is not guaranteed when mix DIMM's populated. - Mix DIMM in 2DPC use 2N Command Mode, speed to be set in BIOS per margin check.
- 5V is SODIMM/UDIMM voltage, 1.1V is Memory down voltage.
- Far memory slot to be populated in case single DIMM placed on 2DPC channel
- IL/NIL mode depends on Memory topology.
- DDR4/DDR5 ECC is supported only when all memory populated in the system supports ECC.
|