Intel® Ethernet 800 Series

Linux Performance Tuning Guide

ID Date Version Classification
636781 11/10/2026 Public
Document Table of Contents

Sub-NUMA Clustering

6th Gen Intel Xeon processors can divide the Last Level Cache (LLC) across a socket into smaller, independent clusters using Sub-NUMA Clustering (SNC). By using memory address checks to group CPU cores with their closest local cache slices, SNC creates distinct sub-NUMA domains within a single physical processor to keep memory access local and reduce latency.

SNC Types and Topology

  • SNC2 (2-way Sub-NUMA Clustering): Supported on Intel Xeon 6 P-Core processors (XCC/HCC platforms). Divides each physical processor into 2 independent NUMA nodes visible to software.
  • SNC3 (3-way Sub-NUMA Clustering): Supported on Intel Xeon 6 P-Core processors (high-density AP platforms). Divides each physical processor into 3 independent NUMA nodes
Note:To enable Sub-NUMA Clustering (SNC) in the BIOS and fully use this feature, the system’s memory must be populated symmetrically. On Intel® Xeon® 6 platforms, successfully establishing localized NUMA domains requires a minimum of 4 memory channels per socket to be populated symmetrically for both SNC2 (out of 8 channels) and SNC3 (out of 12 channels).

BIOS Settings

  • Auto: Default setting; automatically matches the detected SNC configuration
  • Disable: Disables SNC and defaults to UMA (Uniform Memory Access) mode
  • Enable: Enables NUMA interleave mode for the active SNC configuration

Reassigning Network Interfaces Across NUMA Domains in the same socket:

  1. Set the target NUMA node for each PCIe device interface: echo <NUMA_NODE> > /sys/bus/pci/devices/<PCI_ADDRESS>/numa_node

    Example: echo 1 > /sys/bus/pci/devices/0000:65:00.0/numa_node echo 1 > /sys/bus/pci/devices/0000:65:00.1/numa_node

  2. Verify the change using lspci lspci -s <PCI_ADDRESS> -vv | grep NUMA
  3. Reload the ICE drivers.

Note: In virtualization environments, Sub-NUMA Clustering (SNC) improves performance only if your virtual machine fits entirely inside a single CPU tile and its local memory. If your VM is larger than a single tile and needs resources across multiple tiles, you should disable SNC and stick with the default UMA setting.