DPC Control (DPCCTLR) – Offset A06 - 1.3 - ID:764981 | 13th Generation Intel® Core™ Processor Datasheet, Volume 2 of 2

13th Generation Intel® Core™ Processor Datasheet, Volume 2 of 2

ID	Date	Version	Classification
764981	07/13/2023		Public

DPC Control (DPCCTLR) – Offset A06

DPC Control

Bit Range	Default	Access	Field Name and Description
15:8	0x0	RO	Reserved (RSVD_M) Reserved.
7	0x0	RW	DL_Active ERR_COR Enable (DLAECE) This bit when set, enables the downstream port to signal ERR_COR when the link transitions to the DL_Active state.
6	0x0	RW/1S/V	DPC Software Trigger (DPCST) If DPC Trigger is enabled and the DPC Trigger Status bit is clear, software writing a 1b to this bit will cause DPC to be triggered. If DPC Trigger is not enabled or DPC Trigger Status is set, software writing a 1b to this bit has no effect. Note: It is permitted to write 1b to this bit while simultaneously writing updated values to other fields in this register, notably the DPC Trigger Enable field. For this case, the DPC Software Trigger semantics are based on the updated value of the DPC Trigger Enable field. *Note: This bit always return 0b when read.
5	0x0	RW	Poisoned TLP Egress Blocking Enable (PTLPEBE) This bit, when set, enables the associated Egress Port to block the transmission of poisoned TLP.
4	0x0	RW	DPC ERR_COR Enable (DPCECE) When set, this bit enables the generation of an interrupt to indicate that DPC has been triggered.
3	0x0	RW	DPC Interrupt Enable (DPCIE) When set, this bit enables the generation of an interrupt to indicate that DPC has been triggered.
2	0x0	RW	DPC Completion Control (DPCCC) This bit controls the Completion Status for completions formed during DPC. 0b: Completer Abort (CA) Completion Status. 1b: Unsupported Request (UR) Completion Status.
1:0	0x0	RW	DPC Trigger Enable (DPCTE) This field enables DPC and controls the conditions that cause DPC to be triggered. 00b: DPC is disabled. 01b: DPC is enabled and is triggered when the Downstream Port detects an unmasked uncorrectable error or when the Downstream Port receives an ERR_FATAL message. 10b: DPC is enabled and is triggered when the Downstream Port detects an unmasked uncorrectable error or when the Downstream Port receives an ERR_NONFATAL or ERR_FATAL message. 11b: Reserved.