Intel 600 Series Chipset Family PCH Datasheet, Volume 1 of 2

Datasheet

ID 648364
Date 28/10/2021 00:00:00
Public Content

A newer version of this document is available. Customers should click here to go to the newest version.

Document Table of Contents

Signal Description

GbE LAN Signals

Signal Name

Type

Description

PCIE3_​TXP

PCIE3_​TXN

PCIE7_​TXP

PCIE7_​TXN

PCIE15_​TXP

PCIE15_​TXN

O

Differential transmit pairs to the Intel® Ethernet Connection I219 based on the PCIe interface. Refer to PCI Express* (PCIe*) for details on the PCI Express*transmit signals.

Note:

The Intel® Ethernet Connection I219 can be connected to one of the following PCI Express ports 3, 7, 15

PCIE3_​RXP

PCIE3_​RXN

PCIE7_​RXP

PCIE7_​RXN

PCIE15_​RXP

PCIE15_​RXN

I

Differential receive pairs to the Intel® Ethernet Connection I219 based on the PCIe interface. Refer to PCI Express* (PCIe*) for details on the PCI Express* transmit signals.

Note: The Intel® Ethernet Connection I219 can be connected to one of the following PCI Express ports 3, 7 or 15

GPP_​D10 / SML0DATA

I/OD

System Management Link data signal interface to Intel® Ethernet Connection I219. Refer to System Management Interface and SMLink for details on the SML0DATA signal.

Note:The Intel® Ethernet Connection I219 connects to SML0DATA signal.

GPP_​D9 / SML0CLK

I/OD

System Management Link data signal interface to Intel® Ethernet Connection I219. Refer to System Management Interface and SMLink for details on the SML0CLK signal.

Note:The Intel® Ethernet Connection I219 connects to SML0CLK signal.

GPD11 / LANPHYPC

O

LAN PHY Power Control: LANPHYPC should be connected to LAN_​DISABLE_​N on the PHY. PCH will drive LANPHYPC low to put the PHY into a low power state when functionality is not needed.

Note:LANPHYPC can only be driven low if SLP_​LAN# is de-asserted.

SLP_​LAN#

IO

LAN Sub-System Sleep Control: If the Gigabit Ethernet Controller is enabled, when SLP_​LAN# is de-asserted it indicates that the PHY device must be powered. When SLP_​LAN# is asserted, power can be shut off to the PHY device.

Note:If Gigabit Ethernet Controller is statically disabled via BIOS, SLP_​LAN# will be driven low.

GPD2 / LAN_​WAKE#

I

LAN WAKE: LAN Wake Indicator from the GbE PHY.

Note:LAN_​WAKE# functionality is only supported with Intel PHY I219. Connection of a third party LAN device’s wake signal to LAN_​WAKE# is not supported.