13th Generation Intel® Core™ Processors

Datasheet, Volume 1 of 2
Supporting 13th Generation Intel® Core™ Processor for S/P/PX/H/HX/U Processor Line Platforms, formerly known as Raptor Lake

ID 743844
Date 06/15/2023

A newer version of this document is available. Customers should click here to go to the newest version.

Document Table of Contents

Processor SKU Support Matrix

DDR Support Matrix Table

Technology

DDR4

DDR517

LPDDR4x LPDDR5 13 LPDDR5x13
Processor S / H / HX / P / U S / HX S / H / HX / P / U S / HX H / P / U H / P / U /PX H / P / U /PX
Configuration 1DPC 2DPC 9,11 1DPC 15 2DPC 7,9,11 1R/2R 1R/2R 1R/2R
Maximum Frequency [MT/s]

S:

UDIMM 3200

S / HX / H / P / U:

SoDIMM 3200

S:

UDIMM 3200

HX :

SoDIMM 3200

S/HX

SoDIMM:

1R: 5600

2R: 5200

H/P/U

SoDIMM:

1R: 5200

2R: 5200

S :

UDIMM

1R: 5600

2R: 5200

S UDIMM:

1 DIMM - 4400

2 DIMMs 1R - 4000

2 DIMMs 2R - 3600

HX SoDIMM:

1 DIMM - 4000

2 DIMMs 1R - 4000

2 DIMMs 2R - 3600

4266

H/P/U Type4:

1R: 6400

2R: 6000

H/P/U Type318:

1R: 4800

2R: 4800

PX Type4:

1R: 6400

2R: 600014

H/P/U Type4:

1R: 6400

2R: 6000

H/P/U Type318:

1R: 4800

2R: 4800

PX Type4:

1R: 6400

2R: 600014

VDDQ [V] 5

1.2

5,1.19

0.6

0.5

0.5

VDD2 [V] 5

1.2

1.1

1.1 1.05 1.05

Maximum RPC 2

2 4 2 4 2 2 2

Die Density [Gb]

8,16 8,16 16 , 2416 8,16 8, 12 ,16 8, 12 ,16
Ballmap Mode 10 IL /NIL IL /NIL P : NIL, S LGA - IL NIL NIL NIL NIL

Notes:

  1. 1DPC refer to system with one DIMM slot routed per 64-bit channel, 2DPC refer to system with two DIMM slots routed per 64-bit channel.
  2. RPC = Rank Per Channel.
  3. Memory down of all technologies should be implemented homogeneous means that all DRAM devices should be from the same vendor and have the same part number. Implementing a mix of DRAM devices may cause serious signal integrity and functional issues.
  4. There is no support for memory modules with different technologies or capacities on opposite sides of the same memory module. If one side of a memory module is populated, the other side is either identical or empty.
  5. VDD2 is Processor DRAM voltage; VDDQ is DRAM voltage.
  6. Pending DRAM samples availability.
  7. Maximum 2DPC frequency supported when same DIMM part number populated Within channel. Frequency is not guaranteed when mix DIMM's populated..

  8. DDR5 5V is SODIMM/UDIMM voltage, 1.1V is Memory down voltage.
  9. DDR4/DDR5 SoDIMM 2DPC Is not for S-Processor Line.
  10. L/NIL mode depends on Memory topology
  11. Far memory slot to be populated, in case, single DIMM is placed on 2DPC channel.

  12. DDR4/DDR5 ECC is supported only when all populated memory modules in system are support ECC, ECC supported by specific S-Processor Line HX SKUs.

  13. LPDDR5 technology supports 8 Bank Mode, BG (Bank Group) Mode and 16 Bank Mode.LPDDR5x technology supports BG Mode and 16 Bank Mode, according to JEDEC spec.

    The Processor supports BG Mode and 16 Bank Mode. Bank Mode may vary according to SAGV Point.

  14. LPDDR5 2R 6400MT/s is pending Intel enablement.
  15. DDR5 top speed enabled with specific DIMMs, other DIMMs may operate with one speed bin lower and different SAGV points.

  16. DDR5 24Gb die is POR post TTM.
  17. S-DDR5 8+8/6+0 DDR5 speed follows Gen 12 DDR5 speeds. HX 8+8 DDR5 speed follows Gen12 8+8 DDR5 speeds

DDR Technology Support Matrix

Technology

Form Factor

Ball Count

Processor

DDR4

UDIMM

288

S - Processor

DDR4

SoDIMM

260

S/H/HX/P/U/ - Processor

DDR4 1

x16 SDP (1R)1

96

H/P/U - Processor

DDR4 1

x16 DDP (1R)1

96

H/P/U - Processor

DDR41

x8 SDP (1R)1

78

H/P/U - Processor

DDR5

SoDIMM

262

H/HX/P/U/S - Processor

DDR5

UDIMM

288

S - Processor

DDR51

x8 SDP (1R)1

78

H/P/U - Processor

DDR5 1

x16 SDP (1R)1

102

H/P/U - Processor

LPDDR4x 1

x32 (1R, 2R)1

200

H/P/U - Processor

LPDDR4x 1

x64 (1R, 2R)1

432

H/P/U - Processor

LPDDR4x1

х64 (1R, 2R)1

556

H/P/U - Processor

LPDDR5/x 1

x64 (1R, 2R)1

496

H/P/PX/U - Processor

LPDDR5/x1

x32 (1R, 2R)1

315

H/P/PX/U - Processor

Notes:
  1. Memory down of all technologies should be implemented homogeneously, which means that all DRAM devices should be from the same vendor and have the same part number. Implementing a mix of DRAM devices may cause serious signal integrity and functional issues, DDR4/DDR5 restriction is for single MC configuration, LPDDR4x/LPDDR5/x restriction is for both MC configuration (all DRAMs in the system must be from same Part Number).