O

THC0_​SPI1 Clock: THC SPI1 clock output from PCH. Supports 20 MHz, 33 MHz and 50 MHz.

O

THC1_​SPI2 Clock: THC SPI2 clock output from PCH.

O

THC0_​SPI1 Chip Select: Used to select the touch devices if it is connected to THC0_​SPI1 interface.

O

THC1_​SPI2 Chip Select: Used to select the touch devices if it is connected to THC1_​SPI2 interface.

I/O

THC0_​SPI1_​IO0: A bidirectional signal used to support single, dual and quad mode data transfer.

I/O

THC0_​SPI1_​IO1: A bidirectional signal used to support single, dual and quad mode data transfer.

I/O

THC0_​SPI1_​IO2: A bidirectional signal used to support single, dual and quad mode data transfer.

I/O

THC0_​SPI1_​IO3: A bidirectional signal used to support single, dual and quad mode data transfer.

I/O

THC1_​SPI2_​IO0: A bidirectional signal used to support single, dual and quad mode data transfer.

I/O

THC1_​SPI2_​IO1: A bidirectional signal used to support single, dual and quad mode data transfer.

I/O

THC1_​SPI2_​IO2: A bidirectional signal used to support single, dual and quad mode data transfer.

I/O

THC1_​SPI2_​IO3: A bidirectional signal used to support single, dual and quad mode data transfer.

O

THC0_​SPI1 Reset: THC0_​SPI1 Reset signal from Touch host controller.

O

THC1 SPI2 Reset: THC1_​SPI2 Reset signal from Touch host controller.

I

THC0 SPI1 interrupt: THC0_​SPI1 Interrupt signal.

I

THC1 SPI2 interrupt: THC1_​SPI2 Interrupt signal.