Intel® NUC 12 Extreme / Pro X

ID 721073
Date 02/24/2022
Version 1.0
Document Table of Contents

System Memory

The Intel NUC 12 Extreme / Pro X Kit has two 260-pin SO-DIMM sockets and supports the following memory features:

  • 1.2 V DDR4 SDRAM SO-DIMMs with gold plated contacts
  • Two independent memory channels with interleaved mode support
  • Unbuffered, single-sided or double-sided SO-DIMMs
  • 64 GB maximum total system memory (with 16 Gb memory technology)
  • Minimum recommended total system memory: 4096 MB
  • Non-ECC SO-DIMMs
  • Serial Presence Detect
  • DDR4 2133/2400/2666/2933/3200 MHz SDRAM SO-DIMMs
  • Intel® XMP support

Supports 4 Gb, 8 Gb, and 16 Gb memory technology (SDRAM Density)

image9.png NOTE

To be fully compliant with all applicable DDR SDRAM memory specifications, the board should be populated with SO-DIMMs that support the Serial Presence Detect (SPD) data structure. This allows the BIOS to read the SPD data and program the chipset to accurately configure memory settings for optimum performance. If non-SPD memory is installed, the BIOS will attempt to correctly configure the memory settings, but performance and reliability may be impacted or the SO-DIMMs may not function under the determined frequency.

image10.png NOTE

Intel NUC 12 Extreme / Pro X Kits support only 4 Gb, 8 Gb, and 16 Gb memory technologies (also referred to as “SDRAM density”).

For information about…

Refer to:

Tested Memory

The SODIMM memory slots on the NUC 12 Extreme / Pro X Kits is located underneath the NUC 12 Extreme / Pro X Compute Element shroud door. See Figure 3.


Figure 3. SODIMM Location on NUC 12 Extreme / Pro X Element