13th Generation Intel® Core™ and Intel® Core™ 14th Generation Processors

Datasheet, Volume 1 of 2
Supporting 13th Generation Intel® Core™ Processor for S, H, P, HX, and U Processor Line Platforms, formerly known as Raptor Lake, Intel® Core™ 14th Generation Processor for S, HX, and U Processor Line Platform, formerly known as Raptor Lake Refresh and Intel® Xeon™ E 2400 Processor, formerly known As Raptor Lake–E

ID 743844
Date 03/25/2024
Document Table of Contents

Vcc1P8_PROC DC Specifications

Vcc1P8_​PROC Supply DC Voltage and Current Specifications 

Symbol

Parameter

Segment

Minimum

Typical

Maximum

Units

Notes 1,2,5

Vcc1P8_​PROC

Processor Power Rail voltage support PCIe (PHY)

S/S Refresh/E/P/PX/H/U/U Refresh Processor Lines

1.8

V

3

Vcc1P8_​PROC

Processor Power Rail voltage support PCIe (PHY)

HX/HX Refresh Processor Lines

1.8

V

3

TOB1P8_​PROC

Vcc1P8_​PROC Tolerance

All Processor Lines

± 4

%

3,5

AC Noise

AC Noise

All Processor Lines

+/-15

Frequency range from 1KHz Up to 10MHz

+/-5

Frequency range Above 10MHz

mV

6

IccMAX_​1P8_​PROC

Maximum Current for Vcc1P8_​PROC

P/H/PX/U/U Refresh-Processor Lines

100

mA

4

IccMAX_​1P8_​PROC

Maximum Current for Vcc1P8_​PROC

S/S Refresh/E -Processor Line

106

mA

4

IccMAX_​1P8_​PROC

Maximum Current for Vcc1P8_​PROC

HX/HX Refresh-Processor Line

140

mA

4

Notes:
  1. All specifications in this table are based on estimates and simulations or empirical data. These specifications will be updated with characterized data from silicon measurements at a later date.
  2. Long term reliability cannot be assured in conditions above or below Maximum/Minimum functional limits.
  3. The voltage specification requirements are measured on capacitors pads near to the package, with an oscilloscope set to 100 MHz bandwidth, 1.5 pF maximum probe capacitance, and 1 MΩ minimum impedance. The maximum length of ground wire on the probe should be less than 5 mm. Ensure external noise from the system is not coupled into the oscilloscope probe.
  4. Vcc1P8_​PROC power rail may be named in different document as Vcc1P8_​CPU
  5. For S-process line, AC noise spec include VR self generated noise or input source AC noise that passes through to VR output and droop/overshoot due to transient load.