12th Generation Intel® Core™ Processors

Datasheet, Volume 1 of 2

ID 655258
Date 05/30/2022

A newer version of this document is available. Customers should click here to go to the newest version.

Document Table of Contents

Digital Display Interface (DDI) DC Specifications

DSI HS Transmitter DC Specifications

Parameter

Description

Minimum

Nom

Max

Units

Notes1

VCMTX

HS transmit static common-mode voltage

150

200

250

mV

1

| ΔVCMTX(1,0)|

VCMTX mismatch when output is Differential-1 or Differential-0

5

mV

2

|VOD|

HS transmit differential voltage

140

200

270

mV

1

| ΔVOD|

VOD mismatch when output is Differential-1 or Differential-0

14

mV

2

VOHHS

HS output high voltage

360

mV

1

ZOS

Single ended output impedance

40

50

62.5

Ω

ΔZOS

Single ended output impedance mismatch

10

%

Notes:
  1. Value when driving into load impedance anywhere in the ZID range.
  2. A transmitter should minimize ΔVOD and ΔVCMTX(1,0) in order to minimize radiation, and optimize signal integrity

DSI LP Transmitter DC Specifications

Parameter

Description

Minimum

Nominal

Maximum

Units

Notes1

VOH

Thevenin output high level

1.1

1.05

1.3

V

1

0.95

1.3

V

2

VOL

Thevenin output low level

-50

50

mV

ZOLP

Output impedance of LP transmitter

110

Ω

3

Vpin

Pin signal voltage range

-50

1350

mV

ILEAK

Pin Leakage current

-10

10

uA

4

VGNDSH

Ground shift

-50

50

mV

Vpin(ABSMAX)

Transient pin voltage level

-0.15

1.45

V

6

TVpin(ABSMAX)

Maximum transient time above VPIN(MAX) or below VPIN(MIN)

20

ns

5

Notes:
  1. Applicable when the supported data rate <= 1.5 Gbps.
  2. Applicable when the supported data rate > 1.5 Gbps.
  3. Though no maximum value for ZOLP is specified, the LP transmitter output impedance shall ensure the TRLP/TFLP specification is met.
  4. The voltage overshoot and undershoot beyond the VPIN is only allowed during a single 20 ns window after any LP-0 to LP-1 transition or vice versa. For all other situations it must stay within the VPIN range.
  5. This value includes ground shift.

Display Audio and Utility Pins DC Specification

Symbol

Parameter

Minimum

Typical

Maximum

Units

VOL

Output Low Voltage

VCCIO *0.1

V

VOH

Output High Voltage

VCCIO * 0.9

V

Output Impedance

Output Impedance

50

Ω

VIL Input Low Voltage

VCCIO *0.25

V

VIH Input Low Voltage

VCCIO * 0.75

V

  1. DC specification for Disp_​Utils_​1 and Disp_​Utils_​2 signals.
  2. DC specification for: PROC_​AUDOUT, PROC_​AUDIN, PROC_​AUDCLK.