Intel® 500 Series Chipset Family PCH Datasheet Volume 1
Datasheet
| ID | Date | Version | Classification |
|---|---|---|---|
| 635218 | 30/09/2021 00:00:00 | 006 | Public Content |
Legal Disclaimer
Revision History
Introduction and SKU Definition
PCH Controller Device IDs
Memory Mapping
System Management
High Precision Event Timer (HPET)
PCH Thermal Sensor
Power Delivery
Pin Straps
Electrical and Thermal Characteristics
Ballout Definition
8254 Timers
Audio Voice and Speech
Controller Link
Processor Sideband Signals
Digital Display Signals
Enhanced Serial Peripheral Interface eSPI
General Purpose Input and Output (GPIO)
Intel® Serial I/O Inter-Integrated Circuit (I2C) Controllers
Gigabit Ethernet Controller
Integrated Sensor Hub (ISH)
PCH and System Clocks
PCI Express* (PCIe*)
Power Management
Real Time Clock (RTC)
Serial ATA (SATA)
System Management Interface and SMLink
Host System Management Bus (SMBus) Controller
Serial Peripheral Interface (SPI)
Touch Host Controller (THC)
Intel® Serial IO Generic SPI (GSPI) Controllers
Testability
Intel® Serial I/O Universal Asynchronous Receiver/Transmitter (UART) Controllers
Universal Serial Bus (USB)
Connectivity Integrated (CNVi)
GPIO Serial Expander
Direct Media Interface
Private Configuration Space Target Port ID
Miscellaneous Signals
Features Supported
Intel® High Definition Audio (Intel® HD Audio) Controller Capabilities
Audio DSP Capabilities
Intel® High Definition Audio Interface Capabilities
Direct Attached Digital Microphone (PDM) Interface
USB Audio Offload Support
I2S/PCM Interface
Intel® Display Audio Interface
MIPI* SoundWire* Interface
Functional Description
Interrupt Generation
PCI Express* Power Management
Dynamic Link Throttling
Port 8xh Decode
Separate Reference Clock with Independent SSC (SRIS)
Advanced Error Reporting
Single - Root I/O Virtualization (SR - IOV)
SERR# Generation
Hot - Plug
PCI Express* Lane Polarity Inversion
Precision Time Measurement (PTM)
SATA LED
The SATA_LED# output is driven whenever the BSY bit is set in any SATA port. The SATA_LED# is an active - low open - drain output. When SATA_LED# is low, the LED should be active. When SATA_LED# is high, the LED should be inactive.