Intel® Core™ Ultra 200S, Intel® Core™ Ultra 200S Plus ,Intel® Core™ Ultra 200HX and 200HX Plus Series Processors
Datasheet, Volume 1 of 2
| ID | Date | Version | Classification |
|---|---|---|---|
| 832586 | 03/17/2026 | Public |
Legal Disclaimer
Revision History
Introduction
Processor and Device IDs
Package Mechanical Specifications
Memory Mapping
Security Technologies
Intel® Virtualization Technology (Intel® VT)
Instructions Set Enhancements
Platform Environmental Control Interface (PECI)
Intel GMM and Neural Network Accelerator (Intel GNA 3.5)
Intel® Neural Processing Unit (Intel® NPU)
Power Management
Power Delivery
Electrical Specifications
Thermal Management
Clock Topology
Memory
USB Type-C* Sub System
Intel® Volume Management Device (Intel® VMD) Technology
PCI Express* (PCIe*)
Graphics
Display
General Purpose Input and Output
Interrupt Timer Subsystem (ITSS)
Direct Media Interface (DMI)
Direct Enhanced Serial Peripheral Interface (Direct eSPI)
Testability and Monitoring
Miscellaneous Signals
Security Technologies
Intel® Converged Boot Guard and Intel® TXT
Crypto Acceleration Instructions
Intel® Secure Key
Execute Disable Bit
Intel® Supervisor Mode Execution Prevention (Intel® SMEP)
Intel® Supervisor Mode Access Prevention (Intel® SMAP)
User Mode Instruction Prevention (UMIP)
Read Processor ID (RDPID)
Intel® Total Memory Encryption - Multi-Key
Control-flow Enforcement Technology (Intel® CET)
KeyLocker Technology
Intel® System Resources Defense and Intel® System Security Report
BIOS Guard
Intel® Platform Trust Technology
Linear Address Space Separation (LASS)
Security Firmware Engines
Power and Performance Technologies
Intel® Thread Director
Intel® Smart Cache Technology
P-core and E-core Level 0, Level 1 and Level 2 Caches
Ring Interconnect
Intel® Hybrid Technology
Intel® Turbo Boost Technology 2.0
Intel® Turbo Boost Max Technology 3.0
Intel® Adaptive Boost Technology
Intel® System Agent Enhanced SpeedStep ® Technology
Enhanced Intel SpeedStep® Technology
Intel® Thermal Velocity Boost (Intel® TVB)
Intel® Speed Shift Technology
Intel® Advanced Vector Extensions 2 (Intel® AVX2)
Intel® 64 Architecture x2APIC
Intel® Dynamic Tuning Technology (Intel® DTT)
Cache Line Write Back (CLWB)
User Mode Wait Instructions
Thermal Management Features
Adaptive Thermal Monitor
Digital Thermal Sensor
PROCHOT# Signal
PROCHOT Output Only
Bi-Directional PROCHOT#
PROCHOT Demotion Algorithm
Voltage Regulator Protection using PROCHOT#
Thermal Solution Design and PROCHOT# Behavior
Low-Power States and PROCHOT# Behavior
THERMTRIP# Signal
Critical Temperature Detection
Software Controlled Clock Modulation (On-Demand Mode)
System Memory Interface
Processor SKU Support Matrix
Supported Memory Modules and Devices
System Memory Timing Support
Memory Controller (MC)
System Memory Controller Organization Mode
System Memory Frequency
Technology Enhancements of Intel® Fast Memory Access (Intel® FMA)
Data Scrambling
ECC H-Matrix Syndrome Codes
Data Swapping
DDR I/O Interleaving
DRAM Clock Generation
DRAM Reference Voltage Generation
Data Swizzling
Post Package Repair (PPR)
Package Power Control
The package power control settings of PL1, PL2, PL3, PL4, and Tau allow the designer to configure Intel® Turbo Boost Technology 2.0 to match the platform power delivery and package thermal solution limitations.
- Power Limit 1 (PL1): A threshold for average power that will not exceed - recommend to set to equal Processor Base Power power. PL1 should not be set higher than thermal solution cooling limits.
- Power Limit 2 (PL2): A threshold that if exceeded, the PL2 rapid power limiting algorithms will attempt to limit the spike above PL2.
- Power Limit 3 (PL3): A threshold that if exceeded, the PL3 rapid power limiting algorithms will attempt to limit the duty cycle of spikes above PL3 by reactively limiting frequency. This is an optional setting.
- Power Limit 4 (PL4): A limit that will not be exceeded, the PL4 power limiting algorithms will preemptively limit frequency to prevent spikes above PL4.
- Turbo Time Parameter (Tau): An averaging constant used for PL1 exponential weighted moving average (EWMA) power calculation.
- Implementation of Intel® Turbo Boost Technology 2.0 only requires configuring PL1, PL1, Tau and PL2.
- PL3 and PL4 are disabled by default.
-
The Intel Dynamic Tuning (DTT) is recommended for performance improvement in mobile platforms. Dynamic Tuning is configured by system manufacturers dynamically optimizing the processor power based on the current platform thermal and power delivery conditions. Contact Intel Representatives for enabling details.