Intel® Core™ Ultra 200S, Intel® Core™ Ultra 200S Plus ,Intel® Core™ Ultra 200HX and 200HX Plus Series Processors

Datasheet, Volume 1 of 2

ID Date Version Classification
832586 03/17/2026 Public
Document Table of Contents
LAM

VCCPRIM_IO DC Specifications

Processor VCCPRIM_​IO Supply DC Voltage and Current Specifications

Segment Symbol Parameter Minimum Typical Maximum Units Notes 1,2,5
All Processor Lines VCCPRIM_​IO VCCPRIM_​IO Processor I/O Power Rail Voltage - 1.25 - V 2,3,4
All Processor Lines TOBVCCPRIM_​IO Voltage Tolerance - - ± 5 % 2,3
All S Processor Line IccMAXVCCPRIM_​IO Maximum Current - - 7.2 A 3
All HX Processor Line IccMAXVCCPRIM_​IO Maximum Current - - 4.51 A 3
All S-Plus Processor Line IccMAXVCCPRIM_​IO Maximum Current - - 7.2 A 3
All HX-Plus Processor Line IccMAXVCCPRIM_​IO Maximum Current - - 4.51 A 3
Notes:
  1. All specifications in this table are based on estimates and simulations or empirical data. These specifications will be updated with characterized data from silicon measurements at a later date.
  2. Includes AC and DC error, where the AC noise is bandwidth limited to under 1 MHz, measured on package pins. Keep 1st harmonic ripple ≤ 1MHz.
  3. No requirement on the breakdown of AC versus DC noise.
  4. The voltage specification requirements are measured on package pins as near as possible to the processor with an oscilloscope set to 100 MHz bandwidth, 1.5 pF maximum probe capacitance, and 1 MΩ minimum impedance. The maximum length of ground wire on the probe should be less than 5 mm. Ensure external noise from the system is not coupled into the oscilloscope probe