Processor VCCPRIM_VNNAON Supply DC Voltage and Current Specifications
Segment
Symbol
Parameter
Minimum
Typical
Maximum
Unit
Note
All Processor Lines
VCCPRIM_VNNAON
VCCPRIM_VNNAON Power Rail Voltage
-
0.77
-
V
2,3,4
All Processor Lines
TOBVCCPRIM_VNNAON
Voltage Tolerance
-50
-
+50
mV
2,3
S Processor Line
IccMAXVCCPRIM_VNNAON
Maximum Current
-
-
29
A
3
HX Processor Line
IccMAXVCCPRIM_VNNAON
Maximum Current
-
-
29
A
3
S-Plus Processor Line
IccMAXVCCPRIM_VNNAON
Maximum Current
-
-
29
A
3
HX-Plus Processor Line
IccMAXVCCPRIM_VNNAON
Maximum Current
-
-
29
A
3
Notes:
All specifications in this table are based on estimates and simulations or empirical data. These specifications will be updated with characterized data from silicon measurements at a later date.
Includes AC and DC error, where the AC noise is bandwidth limited to under 1 MHz, measured on package pins. Keep 1st harmonic ripple ≤ 1MHz.
No requirement on the breakdown of AC versus DC noise.
The voltage specification requirements are measured on package pins as near as possible to the processor with an oscilloscope set to 100 MHz bandwidth, 1.5 pF maximum probe capacitance, and 1 MΩ minimum impedance. The maximum length of ground wire on the probe should be less than 5 mm. Ensure external noise from the system is not coupled into the oscilloscope probe
Processor VCCPRIM_VNNAON_FLTRA Supply DC Voltage and Current Specifications (HX Processor Line)
Segment
Symbol
Parameter
Minimum
Typical
Maximum
Unit
Note 1
HX Processor Line
VCCPRIM_VNNAON_FLTRA
VCCPRIM_VNNAON_FLTRA Power Rail Voltage
-
0.77
-
V
2,3,4
HX Processor Line
TOBVCCPRIM_VNNAON_FLTRA
Voltage Tolerance
-50
-
+50
mV
2,3
HX Processor Line
IccMAXVCCPRIM_VNNAON_FLTRA
Maximum Current
-
-
88
mA
3
Notes:
All specifications in this table are based on estimates and simulations or empirical data. These specifications will be updated with characterized data from silicon measurements at a later date.
Includes AC and DC error, where the AC noise is bandwidth limited to under 1 MHz, measured on package pins.
No requirement on the breakdown of AC versus DC noise.
The voltage specification requirements are measured on package pins as near as possible to the processor within oscilloscope set to 100 MHz bandwidth, 1.5 pF maximum probe capacitance, and 1 MΩ minimum impedance. The maximum length of ground wire on the probe should be less than 5 mm. Ensure external noise from the system is not coupled into the oscilloscope probe
Processor VCCPRIM_VNNAON_FLTRA Supply DC Voltage and Current Specifications (HX-Plus Processor Line)
Segment
Symbol
Parameter
Minimum
Typical
Maximum
Unit
Note 1
HX-Plus Processor Line
VCCPRIM_VNNAON_FLTRA
VCCPRIM_VNNAON_FLTRA Power Rail Voltage
-
0.77
-
V
2,3,4
HX-Plus Processor Line
TOBVCCPRIM_VNNAON_FLTRA
Voltage Tolerance
-50
-
+50
mV
2,3
HX-Plus Processor Line
IccMAXVCCPRIM_VNNAON_FLTRA
Maximum Current
-
-
88
mA
3
Notes:
All specifications in this table are based on estimates and simulations or empirical data. These specifications will be updated with characterized data from silicon measurements at a later date.
Includes AC and DC error, where the AC noise is bandwidth limited to under 1 MHz, measured on package pins.
No requirement on the breakdown of AC versus DC noise.
The voltage specification requirements are measured on package pins as near as possible to the processor within oscilloscope set to 100 MHz bandwidth, 1.5 pF maximum probe capacitance, and 1 MΩ minimum impedance. The maximum length of ground wire on the probe should be less than 5 mm. Ensure external noise from the system is not coupled into the oscilloscope probe
Processor VCCPRIM_VNNAON_FLTRB Supply DC Voltage and Current Specifications (HX Processor Line)
Segment
Symbol
Parameter
Minimum
Typical
Maximum
Unit
Note 1
HX Processor Line
VCCPRIM_VNNAON_FLTRB
VCCPRIM_VNNAON_FLTRB Power Rail Voltage
-
0.77
-
V
2,3,4
HX Processor Line
TOBVCCPRIM_VNNAON_FLTRB
Voltage Tolerance
-50
-
+50
mV
2,3
HX Processor Line
IccMAXVCCPRIM_VNNAON_FLTRB
Maximum Current
-
-
88
mA
3
Notes:
All specifications in this table are based on estimates and simulations or empirical data. These specifications will be updated with characterized data from silicon measurements at a later date.
Includes AC and DC error, where the AC noise is bandwidth limited to under 1 MHz, measured on package pins.
No requirement on the breakdown of AC versus DC noise.
The voltage specification requirements are measured on package pins as near as possible to the processor within oscilloscope set to 100 MHz bandwidth, 1.5 pF maximum probe capacitance, and 1 MΩ minimum impedance. The maximum length of ground wire on the probe should be less than 5 mm. Ensure external noise from the system is not coupled into the oscilloscope probe
Processor VCCPRIM_VNNAON_FLTRB Supply DC Voltage and Current Specifications (HX-Plus Processor Line)
Segment
Symbol
Parameter
Minimum
Typical
Maximum
Unit
Note 1
HX-Plus Processor Line
VCCPRIM_VNNAON_FLTRB
VCCPRIM_VNNAON_FLTRB Power Rail Voltage
-
0.77
-
V
2,3,4
HX-Plus Processor Line
TOBVCCPRIM_VNNAON_FLTRB
Voltage Tolerance
-50
-
+50
mV
2,3
HX-Plus Processor Line
IccMAXVCCPRIM_VNNAON_FLTRB
Maximum Current
-
-
88
mA
3
Notes:
All specifications in this table are based on estimates and simulations or empirical data. These specifications will be updated with characterized data from silicon measurements at a later date.
Includes AC and DC error, where the AC noise is bandwidth limited to under 1 MHz, measured on package pins.
No requirement on the breakdown of AC versus DC noise.
The voltage specification requirements are measured on package pins as near as possible to the processor within oscilloscope set to 100 MHz bandwidth, 1.5 pF maximum probe capacitance, and 1 MΩ minimum impedance. The maximum length of ground wire on the probe should be less than 5 mm. Ensure external noise from the system is not coupled into the oscilloscope probe