12th Generation Intel® Core™ Processors

Datasheet, Volume 1 of 2

ID 655258
Date 06/15/2023
Document Table of Contents

Package Mechanical Attributes

The S Processor Lines use a Flip Chip technology available in a Land Grid Array (LGA) package and HX Processor Lines use a Flip Chip technology available in a Ball Grid Array (BGA). The following table provides an overview of the package mechanical attributes. For specific dimensions (die size, die location, and so on), refer to the processor package mechanical drawings.

S LGA Processor Package Mechanical Attributes

Package

Parameter

S LGA Processor Lines

Package Technology

Package Type

Flip Chip Land Grid Array

Interconnect

Land Grid Array (LGA)

Lead Free

N/A

Halogenated Flame Retardant Free

Yes

Package Configuration

Solder Ball Composition

N/A

Ball/Pin Count

1700

Grid Array Pattern

Grid Array

Land Side Capacitors

Yes

Die Side Capacitors

Yes

Die Configuration

Single Die Single-Chip Package with HIS

Package Dimensions

Nominal Package Size

45.0 x 37.5 mm

Z

Substrate Z=1.116 mm +/-0.95

Die Z is 0.37 mm

Minimum Ball/Pin pitch

0.8 mm

Parameter

Minimum

Maximum

Static Compressive per Contact 0.098 N [10gf] 0.254 N [25gf]
Static Pre-Load Compressive 400 N [80 lbf; End of life] 845 N [190 lbf; Beginning of life]
Static Total Compressive 534 N [120 lbf, Beginning of Life] 400 N [80 lbf; End of life] 1068 N [240 lbf; Beginning of life]
Dynamic Compressive N/A 489.5 N [110 lbf]
Board Transient Bend Strain N/A 600ue
Maximum Heatsink Mask N/A 550 g
PnP cover vertical removal for SMT 0.5 lb Not recommended for system assy

HX BGA Processor Package Mechanical Attributes

Package

Parameter

HX Processor Lines

Package Technology

Package Type

Flip Chip Ball Grid Array

Interconnect

Ball Grid Array (BGA)

Lead Free

N/A

Halogenated Flame Retardant Free

Yes

Package Configuration

Solder Ball Composition

Yes

Ball/Pin Count

1964

Grid Array Pattern

Grid Array

Land Side Capacitors

Yes

Die Side Capacitors

Yes (resistor/Capacitors)

Die Configuration

Single Die Single-Chip Package

Package Dimensions

Nominal Package Size

45.0 x 37.5 mm

Z

Substrate Z = 1.119+/-0.095 mm

2.005±0.114 (BOTTOM OF BGA TO TOP OF DIE)

Minimum Ball/Pin pitch

0.8 mm

The P/H/U Processor Lines use a Flip Chip technology available in a Ball Grid Array (BGA) package. The following table provides an overview of the package mechanical attributes. For specific dimensions (die size, die location, and so on), refer to the processor package mechanical drawings.

H/P/U15 - Processor Package Mechanical Attributes

Package

Parameter

P/H/U15 Processor Line

Package Technology

Package Type

Flip Chip Ball Grid Array

Interconnect

Ball Grid Array (BGA)

Lead Free

Yes

Halogenated Flame Retardant Free

Yes

Package Configuration

Solder Ball Composition

SAC405

Ball/Pin Count

1744

Grid Array Pattern

Balls anywhere

Land Side Capacitors

Yes

Die Side Capacitors

No

Die Configuration

2 Dice Multi Chip package (MCP)

Package Dimensions

Nominal Package Size

25 x 50 mm

Z

Substrate Z = 0.594+/-0.08mm

1.185±0.096 (BOTTOM OF BGA TO TOP OF DIE)

Minimum Ball/Pin pitch

0.65 mm BP

The U9 Processor Lines use a Flip Chip technology available in a Ball Grid Array (BGA) package. The following table provides an overview of the package mechanical attributes. For specific dimensions (die size, die location, and so on), refer to the processor package mechanical drawings.

U9 - Processor Package Mechanical Attributes

Package

Parameter

U9 Processor Line

Package Technology

Package Type

Flip Chip Ball Grid Array

Interconnect

Ball Grid Array (BGA)

Lead Free

Yes

Halogenated Flame Retardant Free

Yes

Package Configuration

Solder Ball Composition

SAC405

Ball/Pin Count

1781

Grid Array Pattern

Balls anywhere

Land Side Capacitors

Yes

Die Side Capacitors

No

Die Configuration

2 Dice Multi Chip package (MCP)

Package Dimensions

Nominal Package Size

19 x 28.5 mm

Z

Substrate Z = 584±0.065

1.033±0.079 (BOTTOM OF BGA TO TOP OF DIE)

Minimum Ball/Pin pitch

0.4 mm BP