600 Series Chipset Family On-Package Platform Controller Hub

Datasheet, Volume 1 of 2

ID 691222
Date 01/05/2022

A newer version of this document is available. Customers should click here to go to the newest version.

Document Table of Contents

Interrupts

I2C interface has an interrupt line which is used to notify the driver that service is required.

When an interrupt occurs, the device driver needs to read the host controller, DMA interrupt status and TX completion interrupt registers to identify the interrupt source. Clearing the interrupt is done with the corresponding interrupt register in the host controller or DMA.

All interrupts are active high and their behavior is level triggered.