PCI Express* Port Support Feature Details

600 Series Chipset Family On-Package Platform Controller Hub

Download as PDF

ID 691222

Date 01/05/2022

Version

A newer version of this document is available. Customers should click here to go to the newest version.

PCH	Max Transfer Rate	Max Device (Ports)	Max Lanes	PCIe* Gen Type	Encoding	Transfer Rate (MT/s)	Theoretical Max Bandwidth (GB/s)
							x1	x2	x4
PCH-P	8 GT/s (Gen3)	6	12	1	8b/10b	2500	0.25	0.50	1.00
				2	8b/10b	5000	0.50	1.00	2.00
				3	128b/130b	8000	1.00	2.00	3.94
Notes: Theoretical Maximum Bandwidth (GB/s) = ((Transfer Rate * Encoding * # PCIe Lanes) /8)/1000 Gen3 Example: = ((8000 * 128/130* 4)/8)/1000 = 3.94 GB/s When GbE is enabled on a PCIe* Root Port, the Max. Device (Ports) value listed is reduced by a factor of 1

Notes:

RP# refers to a specific PCH PCI Express* Root Port #; for example RP3 = PCH PCI Express* Root Port 3

A PCIe* Lane is composed of a single pair of Transmit (TX) and Receive (RX) differential pairs, for a total of four data wires per PCIe* Lane (such as, PCIE[3]_TXP/ PCIE[3]_TXN and PCIE[3]_RXP/ PCIE[3]_RXN make up PCIe Lane 3). A connection between two PCIe* devices is known as a PCIe* Link, and is built up from a collection of one or more PCIe* Lanes which make up the width of the link (such as bundling 2 PCIe* Lanes together would make a x2 PCIe* Link). A PCIe* Link is addressed by the lowest number PCIe* Lane it connects to and is known as the PCIe* Root Port (such as a x2 PCIe* Link connected to PCIe* Lanes 3 and 4 would be called x2 PCIe* Root Port 3).

The PCIe* Lanes can be configured independently from one another but the max number of configured Root Ports (Devices) must not be exceeded
- PCH-P: A maximum of 6 PCIe* Root Ports (or devices) can be enabled
  - When a GbE Port is enabled, the maximum number of PCIe* Ports (or devices) that can be enabled reduces based off the following:
  - Max PCIe* Ports (or devices) = 6 - GbE (0 or 1)

Unidentified lanes within a PCIe* Link Configuration are disabled but their physical lanes are used for the identified Root Port

The PCH PCIe* Root Ports can be configured to map to any of the SRCCLKREQ# PCIe* clock request signals and the CLKOUT_PCIE_P/N PCIe* differential clock signal pairs.

Lane Reversal Supported Motherboard PCIe* Configurations = 1x4, 2x1+1x2, and 2x2
- The 2x1+1x2 configuration is enabled by setting the PCIe* Controller soft straps to 1x2+2x1 with Lane Reversal Enabled
- 1x4 = 1x4 with Lane Reversal Disabled, 1x4 LR = 1x4 with Lane Reversal Enabled
- 2x2 = 2x2 with Lane Reversal Disabled, 2x2 LR = 2x2 with Lane Reversal Enabled

For unused SATA/PCIe* and USB 3.2/PCIe* Combo Lanes, the unused lanes must be statically assigned to PCIe*, SATA, or USB 3.2 via the SATA/PCIe* and USB 3.2/PCIe* Combo Port Soft Straps discussed in the SPI Programming Guide and through the Intel^® Flash Image Tool (Intel^® FIT) tool.