600 Series Chipset Family On-Package Platform Controller Hub

Datasheet, Volume 1 of 2

ID 691222
Date 01/05/2022

A newer version of this document is available. Customers should click here to go to the newest version.

Document Table of Contents

Signal Description

Signal Descriptions

Signal Name Type Description
Intel High Definition Audio Signals
GPP_​R4 / HDA_​RST# / I2S2_​SCLK / DMIC_​CLK_​A0 O Intel HD Audio Reset: Master H/W reset to internal/external codecs.
GPP_​R1 / HDA_​SYNC / I2S0_​SFRM / DMIC_​CLK_​B1 O Intel HD Audio Sync: 48 kHz fixed rate frame sync to the codecs. Also used to encode the stream number.
GPP_​R0 / HDA_​BCLK / I2S0_​SCLK / DMIC_​CLK_​B0 / HDA_​PROC_​BCLK O Intel HD Audio Bit Clock: Up to 24 MHz serial data clock generated by the Intel HD Audio controller.
GPP_​R2 / HDA_​SDO / I2S0_​TXD / HDA_​PROC_​SDO O Intel HD Audio Serial Data Out: Serial TDM data output to the codecs. The serial output is double-pumped for a bit rate of up to 48 Mb/s.
GPP_​R3 / HDA_​SDI0 / I2S0_​RXD / HDA_​PROC_​SDI I Intel HD Audio Serial Data In 0: Serial TDM data input from the two codec(s). The serial input is single-pumped for a bit rate of up to 24 Mb/s. These signals contain integrated Pull-down resistors, which are enabled while the primary well is powered.
GPP_​R5 / HDA_​SDI1 / I2S2_​SFRM / DMIC_​DATA0 I Intel HD Audio Serial Data In 1: Serial TDM data input from the two codec(s). The serial input is single-pumped for a bit rate of up to 24 Mb/s. These signals contain integrated Pull-down resistors, which are enabled while the primary well is powered.
Intel Display Audio Interface
GPP_​R0 / HDA_​BCLK / I2S0_​SCLK / DMIC_​CLKB0 / HDA_​PROC_​BCLK O Display Audio Bit Clock: Serial data clock generated by the Intel HD Audio controller. PCH supports data rate of up to 96 Mb/s.
GPP_​R2 / HDA_​SDO / I2S0_​TXD / HDA_​PROC_​SDO O Display Audio Serial Data Out: Serial TDM data output to the codec. PCH supports data rate of up to 96 Mb/s.
GPP_​R3 / HDA_​SDI0 / I2S0_​RXD / HDA_​PROC_​SDI I Display Audio Serial Data In: Serial TDM data input from the codec. PCH supports data rate of up to 96 Mb/s.
I2S/PCM Interface
GPP_​R0 / HDA_​BCLK / I2S0_​SCLK / DMIC_​CLKB0 / HDA_​PROC_​BCLK I/O I2S/PCM serial bit clock 0:Clock used to control the timing of a transfer. Can be generated internally (Master mode) or taken from an external source (Slave mode).
GPP_​S0 / SNDW0_​CLK / I2S1_​SCLK I/O I2S/PCM serial bit clock 1:This clock is used to control the timing of a transfer. Can be generated internally (Master mode) or taken from an external source (Slave mode).
GPP_​R4 / HDA_​RST# / I2S2_​SCLK / DMIC_​CLKA0 I/O I2S/PCM serial bit clock 2:This clock is used to control the timing of a transfer. Can be generated internally (Master mode) or taken from an external source (Slave mode).
GPP_​R1 / HDA_​SYNC / I2S0_​SFRM / DMIC_​CLKB1 I/O I2S/PCM serial frame indicator 0: This signal indicates the beginning and the end of a serialized data word. Can be generated internally (Master mode) or taken from an external source (Slave mode).
GPP_​S1 / SNDW0_​DATA / I2S1_​SFRM I/O I2S/PCM serial frame indicator 1: This signal indicates the beginning and the end of a serialized data word. Can be generated internally (Master mode) or taken from an external source (Slave mode).
GPP_​R5 / HDA_​SDI1 / I2S2_​SFRM / DMIC_​DATA0 I/O I2S/PCM serial frame indicator 2: This signal indicates the beginning and the end of a serialized data word. Can be generated internally (Master mode) or taken from an external source (Slave mode).
GPP_​R2 / HDA_​SDO / I2S0_​TXD / HDA_​PROC_​SDO O I2S/PCM transmit data (serial data out)0: This signal transmits serialized data. The sample length is a function of the selected serial data sample size.
GPP_​S2 / SNDW1_​CLK / DMIC_​CLKA0 / I2S1_​TXD O I2S/PCM transmit data (serial data out)1: This signal transmits serialized data. The sample length is a function of the selected serial data sample size.
GPP_​R6 / I2S2_​TXD / DMIC_​CLKA1 O I2S/PCM transmit data (serial data out)2: This signal transmits serialized data. The sample length is a function of the selected serial data sample size.
GPP_​R3 / HDA_​SDI0 / I2S0_​RXD / HDA_​PROC_​SDI I I2S/PCM receive data (serial data in)0: This signal receives serialized data. The sample length is a function of the selected serial data sample size.
GPP_​S3 / SNDW1_​DATA / DMIC_​DATA0 / I2S1_​RXD I I2S/PCM receive data (serial data in)1: This signal receives serialized data. The sample length is a function of the selected serial data sample size.
GPP_​R7 / I2S2_​RXD / DMIC_​DATA1 I I2S/PCM receive data (serial data in)2: This signal receives serialized data. The sample length is a function of the selected serial data sample size.
GPP_​D19 / I2S_​MCLK1_​OUT O I2S/PCM Master reference clock 1: This signal is the master reference clock that connects to an audio codec.
DMIC Interface
GPP_​S2 / SNDW1_​CLK / DMIC_​CLKA0 / I2S1_​TXD

or

GPP_​R4 / HDA_​RST# / I2S2_​SCLK / DMIC_​CLKA0

O Digital Mic Clock A0:Serial data clock generated by the HD Audio controller. The clock output frequency is up to 4.8 MHz. May be duplicated into CLKA and CLKB for individual left / right DMIC power control.
GPP_​S6 / SNDW3_​CLK / DMIC_​CLKA1

or

GPP_​R6 / I2S2_​TXD / DMIC_​CLKA1

O Digital Mic Clock A1:Serial data clock generated by the HD Audio controller. The clock output frequency is up to 4.8 MHz. May be duplicated into CLKA and CLKB for individual left / right DMIC power control.
GPP_​S4 / SNDW2_​CLK / DMIC_​CLKB0

or

GPP_​R0 / HDA_​BCLK / I2S0_​SCLK / DMIC_​CLKB0 / HDA_​PROC_​BCLK

O Digital Mic Clock B0:Serial data clock generated by the HD Audio controller. The clock output frequency is up to 4.8 MHz. May be duplicated into CLKA and CLKB for individual left / right DMIC power control.
GPP_​S5 / SNDW2_​DATA / DMIC_​CLKB1 or GPP_​R1 / HDA_​SYNC / I2S0_​SFRM / DMIC_​CLKB1 O Digital Mic Clock B1:Serial data clock generated by the HD Audio controller. The clock output frequency is up to 4.8 MHz. May be duplicated into CLKA and CLKB for individual left / right DMIC power control.
GPP_​S3 / SNDW1_​DATA / DMIC_​DATA0 / I2S1_​RXD

or

GPP_​R5 / HDA_​SDI1 / I2S2_​SFRM / DMIC_​DATA0

I Digital Mic Data:Serial data input from the digital mic.
GPP_​S7 / SNDW3_​DATA / DMIC_​DATA1

or

GPP_​R7 / I2S2_​RXD / DMIC_​DATA1

I Digital Mic Data:Serial data input from the digital mic.
SoundWire Interface
GPP_​S0 / SNDW0_​CLK / I2S1_​SCLK I/O SoundWire Clock: Serial data clock to external peripheral devices.
GPP_​S1 / SNDW0_​DATA / I2S1_​SFRM I/O SoundWire Data: Serial data input from external peripheral devices.
GPP_​S2 / SNDW1_​CLK / DMIC_​CLKA0 / I2S1_​TXD I/O SoundWire Clock: Serial data clock to external peripheral devices.
GPP_​S3 / SNDW1_​DATA / DMIC_​DATA0 / I2S1_​RXD I/O SoundWire Data: Serial data input from external peripheral devices.
GPP_​S4 / SNDW2_​CLK / DMIC_​CLKB0 I/O SoundWire Clock: Serial data clock to external peripheral devices.
GPP_​S5 / SNDW2_​DATA / DMIC_​CLKB1 I/O SoundWire Data: Serial data input from external peripheral devices.
GPP_​S6 / SNDW3_​CLK / DMIC_​CLKA1 I/O SoundWire Clock: Serial data clock to external peripheral devices.
GPP_​S7 / SNDW3_​DATA / DMIC_​DATA1 I/O SoundWire Data: Serial data input from external peripheral devices.
SNDW_​RCOMP I/O SoundWire RCOMP:200ohm +/- 1% compensation resistor required to ground.
Misc
GPP_​B14 / SPKR / TIME_​SYNC1 / SATA_​LED# / ISH_​GP6 O Speaker Output:Used for connection to external speaker for POST sounds if not using HD_​Audio embedded option.