Intel® Core™ Ultra 200S and 200HX Series Processors

Datasheet, Volume 1 of 2

ID Date Version Classification
832586 03/11/2025 Public

A newer version of this document is available. Customers should click here to go to the newest version.

Document Table of Contents
LAM

VCCPRIM_IO DC Specifications

VCCPRIM_​IO Supply DC Voltage and Current Specifications

Symbol Parameter Segment Minimum Typical Maximum Units Notes 1,2,5
VCCPRIM_​IO Processor I/O Power Rail Voltage All - 1.25 - V 2,3,4
TOB VCCPRIM_​IO Voltage Tolerance All - - ± 5 % 2,3
IccMAX_​VCCPRIM_​IO Maximum Current S/HX-Processor Line - - 7.16 A 3
Notes:
  1. All specifications in this table are based on estimates and simulations or empirical data. These specifications will be updated with characterized data from silicon measurements at a later date.
  2. Includes AC and DC error, where the AC noise is bandwidth limited to under 1 MHz, measured on package pins. Keep 1st harmonic ripple ≤ 1MHz.
  3. No requirement on the breakdown of AC versus DC noise.
  4. The voltage specification requirements are measured on package pins as near as possible to the processor with an oscilloscope set to 100 MHz bandwidth, 1.5 pF maximum probe capacitance, and 1 MΩ minimum impedance. The maximum length of ground wire on the probe should be less than 5 mm. Ensure external noise from the system is not coupled into the oscilloscope probe