Intel® Core™ Ultra 200S and 200HX Series Processors

Datasheet, Volume 1 of 2

ID Date Version Classification
832586 03/11/2025 Public

A newer version of this document is available. Customers should click here to go to the newest version.

Document Table of Contents
LAM

VDD2 DC Specifications

Memory Controller (VDD2) Supply DC Voltage and Current Specifications 

Symbol Parameter Segment Minimum Typical Maximum Unit Note1
VDD2 (DDR5) Processor I/O Supply Voltage for DDR5 All - 1.1 - V 3,4,5
TOB VDD2 Voltage Tolerance All - - ± 5 % 3,4
IccMAX_​VDD2 Maximum Current for VDD2 Rail S-Processor Line - - 4.22 A 2
IccMAX_​VDD2 Maximum Current for VDD2 Rail HX-Processor Line - - 4.22 A 2
Notes:
  1. All specifications in this table are based on estimates and simulations or empirical data. These specifications will be updated with characterized data from silicon measurements at a later date.
  2. The current supplied to the DIMM modules is not included in this specification.
  3. Includes AC and DC error, where the AC noise is bandwidth limited to under 1 MHz, measured on package pins.
  4. No requirement on the breakdown of AC versus DC noise.
  5. The voltage specification requirements are measured on package pins as near as possible to the processor with an oscilloscope set to 100 MHz bandwidth, 1.5 pF maximum probe capacitance, and 1 MΩ minimum impedance. The maximum length of ground wire on the probe should be less than 5 mm. Ensure external noise from the system is not coupled into the oscilloscope probe.