VCCPRIM_VNNAON DC Specifications - 005 - ID:832586 | Intel® Core™ Ultra 200S and 200HX Series Processors

Intel® Core™ Ultra 200S and 200HX Series Processors

Datasheet, Volume 1 of 2

ID	Date	Version	Classification
832586	03/11/2025		Public

A newer version of this document is available. Customers should click here to go to the newest version.

VCCPRIM_VNNAON DC Specifications

VCCPRIM_VNNAON Supply DC Voltage and Current Specifications

Symbol	Parameter	Segment	Minimum	Typical	Maximum	Unit	Note
VCCPRIM_VNNAON	VCCPRIM_VNNAON Power Rail Voltage	All	-	0.77	-	V	2,3,4
TOB _{VCCPRIM_VNNAON}	Voltage Tolerance	All	-50	-	+50	mV	2,3
IccMAX_VNNAON	Maximum Current	S-Processor Line	-	-	29	A	3
IccMAX_VNNAON	Maximum Current	HX-Processor Line	-	-	29	A	3
Notes: All specifications in this table are based on estimates and simulations or empirical data. These specifications will be updated with characterized data from silicon measurements at a later date. Includes AC and DC error, where the AC noise is bandwidth limited to under 1 MHz, measured on package pins. Keep 1st harmonic ripple ≤ 1MHz. No requirement on the breakdown of AC versus DC noise. The voltage specification requirements are measured on package pins as near as possible to the processor with an oscilloscope set to 100 MHz bandwidth, 1.5 pF maximum probe capacitance, and 1 MΩ minimum impedance. The maximum length of ground wire on the probe should be less than 5 mm. Ensure external noise from the system is not coupled into the oscilloscope probe

VCCPRIM_VNNAON_FLTRA (HX-Processor Line)

Symbol	Parameter	Segment	Minimum	Typical	Maximum	Unit	Note 1
VCCPRIM_VNNAON_FLTRA	VCCPRIM_VNNAON_FLTRA Power Rail Voltage	HX-Processor Line	-	0.77	-	V	2,3,4
TOB VCCPRIM_VNNAON_FLTRA	Voltage Tolerance	HX-Processor Line	-50	-	+50	mV	2,3
IccMAX_VCCPRIM_VNNAON_FLTRA	Maximum Current	HX-Processor Line	-	-	88	mA	3
Notes: All specifications in this table are based on estimates and simulations or empirical data. These specifications will be updated with characterized data from silicon measurements at a later date. Includes AC and DC error, where the AC noise is bandwidth limited to under 1 MHz, measured on package pins. No requirement on the breakdown of AC versus DC noise. The voltage specification requirements are measured on package pins as near as possible to the processor within oscilloscope set to 100 MHz bandwidth, 1.5 pF maximum probe capacitance, and 1 MΩ minimum impedance. The maximum length of ground wire on the probe should be less than 5 mm. Ensure external noise from the system is not coupled into the oscilloscope probe

VCCPRIM_VNNAON_FLTRB (HX-Processor Line)

Symbol	Parameter	Segment	Minimum	Typical	Maximum	Unit	Note 1
VCCPRIM_VNNAON_FLTRB	VCCPRIM_VNNAON_FLTRB Power Rail Voltage	HX-Processor Line	-	0.77	-	V	2,3,4
TOB VCCPRIM_VNNAON_FLTRB	Voltage Tolerance	HX-Processor Line	-50	-	+50	mV	2,3
IccMAX_VCCPRIM_VNNAON_FLTRB	Maximum Current	HX-Processor Line	-	-	88	mA	3
Notes: All specifications in this table are based on estimates and simulations or empirical data. These specifications will be updated with characterized data from silicon measurements at a later date. Includes AC and DC error, where the AC noise is bandwidth limited to under 1 MHz, measured on package pins. No requirement on the breakdown of AC versus DC noise. The voltage specification requirements are measured on package pins as near as possible to the processor within oscilloscope set to 100 MHz bandwidth, 1.5 pF maximum probe capacitance, and 1 MΩ minimum impedance. The maximum length of ground wire on the probe should be less than 5 mm. Ensure external noise from the system is not coupled into the oscilloscope probe