12th Generation Intel® Core™ Processors Datasheet, Volume 1 of 2

Datasheet

ID 655258
Date 28/10/2021 00:00:00
Public Content

A newer version of this document is available. Customers should click here to go to the newest version.

Document Table of Contents

Package Mechanical Attributes

The S Processor Lines use a Flip Chip technology available in a Land Grid Array (LGA) package. The following table provides an overview of the package mechanical attributes. For specific dimensions (die size, die location, and so on), refer to the processor package mechanical drawings.

S LGA Processor Package Mechanical Attributes

Package

Parameter

S LGA Processor Line

Package Technology

Package Type

Flip Chip Land Grid Array

Interconnect

Land Grid Array (LGA)

Lead Free

N/A

Halogenated Flame Retardant Free

Yes

Package Configuration

Solder Ball Composition

N/A

Ball/Pin Count

1700

Grid Array Pattern

Grid Array

Land Side Capacitors

Yes

Die Side Capacitors

Yes

Die Configuration

Single Die Single-Chip Package with HIS

Package Dimensions

Nominal Package Size

45.0 x 37.5 mm

Z

Substrate Z=1.116 mm +/-0.95

Die Z is 0.37 mm

Minimum Ball/Pin pitch

0.8 mm

Parameter

Minimum

Maximum

Static Compressive per Contact 0.098 N [10gf] 0.254 N [25gf]
Static Pre-Load Compressive 400 N [80 lbf; End of life] 845 N [190 lbf; Beginning of life]
Static Total Compressive 534 N [120 lbf, Beginning of Life] 400 N [80 lbf; End of life] 1068 N [240 lbf; Beginning of life]
Dynamic Compressive N/A 489.5 N [110 lbf]
Board Transient Bend Strain N/A 600ue
Maximum Heatsink Mask N/A 550 g
PnP cover vertical removal for SMT 0.5 lb Not recommended for system assy