Intel® Core™ Processor (Series 3)
Formerly known as Wildcat Lake, Datasheet, Volume 1 of 2
| ID | Date | Version | Classification |
|---|---|---|---|
| 913965 | 05/19/2026 | 001 | Public |
Legal Disclaimer
Revision History
Introduction
Processor and Device IDs
Package Mechanical Specifications
Memory Mapping
Security Technologies
Intel Virtualization Technology
Instructions Set Enhancements
Intel® Neural Processing Unit (Intel® NPU)
Audio Voice and Speech
Power Management
Power Delivery
Thermal Management
System Clocks
Real Time Clock (RTC)
Memory
USB Type-C Sub System
Universal Serial Bus (USB)
PCI Express (PCIe)
Universal Flash Storage
Graphics
Display
Processor Sideband Signals
General Purpose Input and Output
Interrupt Timer Subsystem (ITSS)
Intel® Serial IO Inter-Integrated Circuit (I2C) Controllers
Intel® Serial IO Improved Inter-Integrated Circuit (I3C) Controllers
Gigabit Ethernet Controller
Connectivity Integrated (CNVi)
Controller Link
Integrated Sensor Hub (ISH)
System Management Interface and SMLink
Host System Management Bus (SMBus) Controller
Serial Peripheral Interface (SPI)
Enhanced Serial Peripheral Interface (eSPI)
Intel® Serial IO Generic SPI (GSPI) Controllers
Touch Host Controller (THC)
Intel® Serial IO Universal Asynchronous ReceiverTransmitter (UART) Controlle
Private Configuration Space Port ID
Testability and Monitoring
Security Technologies
Intel® Converged Boot Guard and TXT
Crypto Acceleration Instructions
Intel® Secure Key
Execute Disable Bit
Intel® Supervisor Mode Execution Protection (Intel® SMEP)
Intel® Supervisor Mode Access Protection (Intel® SMAP)
User Mode Instruction Prevention (UMIP)
Read Processor ID (RDPID)
Intel® System Resources Defense and Intel® System Security Report
Intel® Total Memory Encryption - Multi-Key
Control-flow Enforcement Technology (Intel® CET)
BIOS Guard
Intel® Platform Trust Technology
Linear Address Space Separation (LASS)
Intel® Total Storage Encryption (Intel® TSE)
Security Firmware Engines
Audio Voice and Speech
Intel® High Definition Audio (Intel® HD Audio) Controller Capabilities
Audio DSP Capabilities
Intel® High Definition Audio Interface Capabilities
Direct Attached Digital Microphone (PDM) Interface
USB Audio Offload Support
I2S PCM Interface
Intel® Display Audio Interface
MIPI® SoundWire Interface
Signal Description
Integrated Pull-Ups and Pull-Downs
IO Signal Planes and States
Power and Performance Technologies
Intel® Thread Director
Intel® Smart Cache Technology
P-core LP E-core Level 0, Level 1 and Level 2 Caches
Ring Interconnect
Intel® Hybrid Technology
Intel® Turbo Boost Technology 2.0
Intel® Adaptive Boost Technology
Intel System Agent Enhanced SpeedStep ® Technology
Enhanced Intel SpeedStep® Technology
Intel® Speed Shift Technology
Intel® Advanced Vector Extensions 2 (Intel® AVX2)
Intel® 64 Architecture x2APIC
Intel® Dynamic Tuning Technology (Intel® DTT)
Cache Line Write Back (CLWB)
User Mode Wait Instructions
Thermal Management Features
Skin Temperature Control (STC)
Adaptive Thermal Monitor
Digital Thermal Sensor
FORCEPR# Signal
FORCEPR Demotion
Voltage Regulator Protection using FORCEPR#
Thermal Solution Design and FORCEPR Behavior
Low-Power States and FORCEPR Behavior
THERMTRIP Signal
Critical Temperature Detection
System Memory Interface
Processor SKU Support Matrix
Supported Memory Modules and Devices
System Memory Timing Support
Memory Controller (MC)
System Memory Frequency
Technology Enhancements of Intel® Fast Memory Access (Intel® FMA)
Data Scrambling
Data Swapping
LPDDR5x CMDADD Ascending and Descending
DDR IO Interleaving
DRAM Clock Generation
DRAM Reference Voltage Generation
Data Swizzling
Error Correction With Standard RAM
Post Package Repair (PPR)
RFM
In-Memory Analytics Accelerator
PCI Power Management
The integrated GbE controller supports the Advanced Configuration and Power Interface (ACPI) specification as well as Advanced Power Management (APM). This enables the network-related activity (using an internal host wake signal) to wake up the host. For example, from S4 to S0.
The integrated GbE controller contains power management registers for PCI and supports D0 and D3 states. PCI transactions are only allowed in the D0 state, except for host accesses to the integrated GbE controller’s PCI configuration registers.
The
- The LAN PHY is always powered when the Host and Intel® CSME systems are running.
- If the LAN PHY is required by Intel® CSME in Sx/M-Off , Intel® CSME must configure SLP_LAN#=’1’ irrespective of the power source and the destination power state. Intel® CSME must be powered at least once after G3 to configure this.
- If the LAN PHY is required after a G3 transition, the host BIOS must set AG3_PP_EN.
- If the LAN PHY is required in Sx/M-Off, the host BIOS must set SX_PP_EN.
- If the LAN PHY is not required if the source of power is battery, the host BIOS must set DC_PP_DIS.