Intel® Core™ Processor (Series 3)

Formerly known as Wildcat Lake, Datasheet, Volume 1 of 2

ID Date Version Classification
913965 05/19/2026 001 Public
Document Table of Contents
RFM

Maximum Pressure Specifications

A more relevant metric for concentrated loading is chosen by Intel based on the physics of failure to evaluate tile damage risk due to thermal solution enabling .

  • Static Compressive Pressure refers to the long-term steady state pressure applied to the tile from the thermal solution after system assembly is complete
  • Transient Compressive Pressure refers to the pressure on the tiles at any moment during the thermal solution assembly/disassembly procedures. Other system procedures such as repair/rework can also cause high pressure loading to occur on the tile and should be evaluated to ensure these limits are not exceeded

Metric: This metric is pressure over a 2 mm x 2 mm area

Package Loading Specifications

Static Compressive Pressure1 [PSI]

Transient Compressive Pressure1 [PSI]

800 psi

800 psi

Notes:
  • This is the load and pressure that has been tested by Intel for a single assembly cycle. This metric is a pressure over 2 mm2 (2 mm x 2 mm) area.
  • For Static compressive pressure, the load conditions and corresponding pressure conditions need to be followed by the thermal attach design of maximum 10 lbf on 0.6 mm board and maximum of 15 lbf on 0.8 mm board.