Intel® Core™ Ultra 200V Series Processors
Datasheet, Volume 1 of 2
| ID | Date | Version | Classification |
|---|---|---|---|
| 829568 | 05/27/2025 | 004 | Confidential |
Signal Description
| Signal Name | Type | Description |
|---|---|---|
| GPP_C04/SML0DATA/USB-C_GPP_C04 | I/OD | System Management Link 0 Data: SMBus link to external PHY. External Pull-up resistor required. |
| GPP_C03/SML0CLK/USB-C_GPP_C03 | I/OD | System Management Link 0 Clock External Pull-up resistor required. |
| GPP_C05/SML0ALERT#/USB-C_GPP_C05 | I/OD | System Management 0 Alert: Alert for the SMBus controller to optional Embedded Controller or BMC. External Pull-up resistor required. |
| GPP_C06/SML1CLK/USB-C_GPP_C06 | I/OD | System Management Link 1 Clock: SMBus link to optional Embedded Controller or BMC. External Pull-up resistor required. |
| GPP_C07/SML1DATA/USB-C_GPP_C07 | I/OD | System Management Link 1 Data: SMBus link to optional Embedded Controller or BMC. External Pull-up resistor required. |
| GPP_C08/SML1ALERT#/SOCHOT#/USB-C_GPP_C08 | I/OD | System Management 1 Alert: Alert for the SMBus controller to optional Embedded Controller or BMC. A soft-strap determines the native function SML1ALERT# or SOCHOT# usage. This is NOT the right Alert pin for USB-C* usage. External Pull-up resistor is required on this pin. |
| GPP_D06/ISH_UART0_TXD/ISH_SPI_CLK/SML0BCLK/USB-C_GPP_D06 | I/OD | System Management Link 0 B Clock External Pull-up resistor required. |
| GPP_D05/ISH_UART0_RXD/ISH_SPI_CS#/SML0BDATA/USB-C_GPP_D05 | I/OD | System Management Link 0 B Data External Pull-up resistor required. |
| GPP_D08/ISH_UART0_CTS#/ISH_SPI_MOSI/SML0BALERT#/USB-C_GPP_D08 | I/OD | System Management 0 Alert: Alert for the SMBus controller to optional Embedded Controller or BMC. External Pull-up resistor required. |
| GPP_B00/USB-C_SMLCLK/USB-C_GPP_B00 | I/OD | System Management bus over Sideband 2 Core Clock External Pull-up resistor required. |
| GPP_B01/USB-C_SMLDATA/USB-C_GPP_B01 | I/OD | System Management bus over Sideband 2 Core Clock External Pull-up resistor required. |
| INTRUDER# | I | Intruder Detect. |