31:17

0h

RO

Reserved

16

0h

RW

WQ Occupancy Interrupt Enable (OIE)

Setting this field to 1 causes the device to generate an interrupt when the WQ occupancy is at or less than the WQ Occupancy Limit. The device sets the Interrupt Generated field when the interrupt is generated. This field may be set to 1 at the same time the WQ Occupancy Limit field is set to the desired value.If this field is set to 1 with Limit = the current WQ occupancy, the interrupt is generated immediately.
If the WQ Occupancy Interrupt Support field in WQCAP is 0, this field is reserved.
If this field is set to 1 while the WQ is Disabled, the interrupt will be delivered at the time the WQ is enabled.

15:0

0h

RW/L

WQ Occupancy Limit (OL)

When the WQ Occupancy Interrupt Enable is 1 and the WQ occupancy is at or below the value in this field, an interrupt is generated.
This field is read-only while WQ Occupancy Interrupt Enable is 1; however, it may be changed at the same time that WQ Occupancy Interrupt Enable is set to 1.1
If the WQ Occupancy Interrupt Support field in WQCAP is 0, this field is reserved.