Intel® 800 Series Chipset Family Platform Controller Hub (PCH)
Datasheet, Volume 1 of 2
Signal Description
| Signal Name | Type | Description |
|---|---|---|
| GPP_D09/SML0CLK | I/OD | System Management Link 0 Clock: SMLink0 is used between PCH's LAN controller and the PHY. External Pull-up resistor required. |
| GPP_D10/SML0DATA | I/OD | System Management Link 0 Data: SMLink0 is used between PCH's LAN controller and the PHY.. External Pull-up resistor required. |
| GPP_C05/SML0ALERT#/USB-C_GPP_C05 | I/OD | System Management 0 Alert: SMLink0 is used between PCH's LAN controller and the PHY. External Pull-up resistor required. |
| GPP_D04/SML1CLK | I/OD | System Management Link 1 Clock: SMBus link to optional Embedded Controller or BMC. External Pull-up resistor required. |
| GPP_D15/SML1DATA | I/OD | System Management Link 1 Data: SMBus link to optional Embedded Controller or BMC. External Pull-up resistor required. |
| GPP_B21/SML1ALERT#/PCHHOT# | I/OD | System Management 1 Alert: Alert for the SMBus controller to optional Embedded Controller or BMC. A soft-strap determines the native function SML1ALERT# or PCHHOT# usage. This is NOT the right Alert pin for USB-C* usage. SMLink4 should be used for USB-C* usage. External Pull-up resistor is required on this pin. |
| GPP_H09/SML2CLK/USB-C_GPP_H09 | I/OD | System Management Link 2 Clock: SMBus link to external PHY. External Pull-up resistor required. |
| GPP_H10/SML2DATA/USB-C_GPP_H10 | I/OD | System Management Link 2 Data External Pull-up resistor required. |
| GPP_H11/SML2ALERT#/USB-C_GPP_H11 | I/OD | System Management 2 Alert: Alert for the SMBus controller to optional Embedded Controller or BMC. External Pull-up resistor required. |
| GPP_H12/SML3CLK/USB-C_GPP_H12 | I/OD | System Management Link 3 Clock: SMBus link to external PHY. External Pull-up resistor required. |
| GPP_H13/SML3DATA/USB-C_GPP_H13 | I/OD | System Management Link 3 Data External Pull-up resistor required. |
| GPP_H14/SML3ALERT#/USB-C_GPP_H14 | I/OD | System Management 3 Alert: Alert for the SMBus controller to optional Embedded Controller or BMC. External Pull-up resistor required. |
| GPP_H15/SML4CLK/USB-C_GPP_H15 | I/OD | System Management Link 4 Clock: SMBus link to PD Controllers. External Pull-up resistor required. |
| GPP_H16/SML4DATA/USB-C_GPP_H16 | I/OD | System Management Link 4 Data SMBus link to PD Controllers. External Pull-up resistor required. |
| GPP_H17/SML4ALERT#/USB-C_GPP_H17 | I/OD | System Management 4 Alert: SMBus link to PD Controllers. External Pull-up resistor required. |
| GPP_C04/ISH_UART0_TXD/SML0BCLK/I2C2_SCL/USB-C_GPP_C04 | I/OD | System Management Link 0 B Clock External Pull-up resistor required. |
| GPP_C03/ISH_UART0_RXD/SML0BDATA/I2C2_SDA/USB-C_GPP_C03 | I/OD | System Management Link 0 B Data External Pull-up resistor required. |
| GPP_E21/ISH_UART0_CTS#/SML0BALERT# | I/OD | System Management 0 Alert: Alert for the SMBus controller to optional Embedded Controller or BMC. External Pull-up resistor required. |
| INTRUDER# | I | Intruder Detect |
| SMI# | OD | System Management Interrupt (SMI) - Event indication to BMC (Server) |
| NMI# | OD | Non Maskable Interrupt (NMI)- Event indication to BMC (Server) |