Intel® 800 Series Chipset Family Platform Controller Hub (PCH)
Datasheet, Volume 1 of 2
ID | Date | Version | Classification |
---|---|---|---|
833778 | 01/07/2025 | Public |
Legal Disclaimer
Revision History
Introduction
PCH Controller Device IDs
Memory Mapping
Audio Voice and Speech
Ballout Definition
Connectivity Integrated (CNVi)
Controller Link
Direct Enhanced Serial Peripheral Interface (Direct eSPI)
Direct Media Interface (DMI)
Enhanced Serial Peripheral Interface (eSPI)
Gigabit Ethernet Controller
Host System Management Bus (SMBus) Controller
Integrated Sensor Hub (ISH)
Intel® Serial I/O Improved Inter-Integrated Circuit (I3C) Controllers
Intel® Serial I/O Inter-Integrated Circuit (I2C) Controllers
Intel® Serial I/O Universal Asynchronous Receiver/Transmitter (UART) Controllers
Intel® Serial IO Generic SPI (GSPI) Controllers
PCI Express* (PCIe*)
Real Time Clock (RTC)
Serial ATA (SATA)
Serial Peripheral Interface (SPI)
System Clocks
System Management Interface and SMLink
Touch Host Controller (THC)
Universal Serial Bus (USB)
General Purpose Input and Output
GPIO Serial Expander
Private Configuration Space Port ID
Security Firmware Engines
System Management
Testability and Monitoring
Miscellaneous Signals
Processor Sideband Signals
Power Delivery
Power Management
Thermal Sensor
Electrical Characteristics
Audio Voice and Speech
Intel® High Definition Audio (Intel® HD Audio) Controller Capabilities
Audio DSP Capabilities
Intel® High Definition Audio Interface Capabilities
Direct Attached Digital Microphone (PDM) Interface
USB Audio Offload Support
I2S / PCM Interface
Intel® Display Audio Interface
MIPI® SoundWire* Interface
Signal Description
Integrated Pull-Ups and Pull-Downs
I/O Signal Planes and States
Functional Description
Configuration Flow
PCH Direct eSPI Registers
PCH Direct eSPI Reset Handling
PCH Direct eSPI Peripheral Channel Support
PCH Direct eSPI VW Channel Support
PCH Direct eSPI OOB Channel Support
PCH Direct eSPI Flash Channel Support
PCH eSPI Switch
Flash Descriptor Address Swapping
USB Audio Offload Support
USB Audio Offload provides audio mixing / processing support for USB audio endpoint connected through the xHCI Controller. This is aimed at providing a universal audio offload power benefit across various audio devices connected to the platform and USB audio usage is expected to gain more popularity with the introduction of USB Type-C* connector. These USB audio endpoint will be enumerated by the xHCI Controller SW and only the audio streaming path is peer to the Audio DSP subsystem for DSP FW mixing / processing support. USB Audio Offload capabilities are listed as follows:
- Up to 2 audio output streams support
- Up to 4 audio input streams support
- Provides cadence for 44.1 kHz-based sample rate output
- Support isochronous audio stream offload for LS / FS / HS USB audio device
- Support synchronous / asynchronous / adaptive modes of isochronous audio streaming
- Support non-PCM encoded audio bit stream defined by IEC61937 / IEC60958 standard