12th Generation Intel® Core™ Processors

Datasheet, Volume 1 of 2

ID 655258
Date 08/08/2022
Document Table of Contents

VCC_MIPILP DC Specifications

VCC_​MIPILP Supply DC Voltage and Current Specifications 

Symbol

Parameter

Segment

Minimum

Typical

Maximum

Unit

Note1

VVCC_​MIPILP

Processor Power Rail

All

1.1

1.23

1.3

V

2,3,4

IccMAX_​VCC_​MIPILP

Maximum Current for VVCC_​MIPILP Rail

U/P-Processor Line

–—

210

mA

3

IccMAX_​VCC_​MIPILP

Maximum Current for VVCC_​MIPILP Rail

H-Processor Line

–—

210

mA

3

Notes:
  1. All specifications in this table are based on estimates and simulations or empirical data. These specifications will be updated with characterized data from silicon measurements at a later date.
  2. Includes AC and DC error, where the AC noise is bandwidth limited to under 1 MHz, measured on package pins.
  3. No requirement on the breakdown of AC versus DC noise.
  4. The voltage specification requirements are measured on package pins as near as possible to the processor with an oscilloscope set to 100 MHz bandwidth, 1.5 pF maximum probe capacitance, and 1 MΩ minimum impedance. The maximum length of ground wire on the probe should be less than 5 mm. Ensure external noise from the system is not coupled into the oscilloscope probe.