Intel® Pentium® Silver and Intel® Celeron® Processors Datasheet, Volume 1
Datasheet
ID | Date | Version | Classification |
---|---|---|---|
633935 | 17/06/2021 00:00:00 | Public Content |
A newer version of this document is available. Customers should click here to go to the newest version.
Legal Disclaimer
Revision History
Introduction
Technologies
Power Management
Thermal Management
Memory
Graphics
Display
Imaging
Pin Strap
General Purpose Input and Output (GPIO)
PCH Electrical Specification
CPU Electrical Specifications
Global Device IDs
CPU And Device IDs
Audio, Voice, and Speech
Connectivity Integrated (CNVi)
PCI Express* (PCIe*)
Universal Serial Bus (USB)
Serial ATA (SATA)
Flexible I/O
Storage
Serial Peripheral Interface (SPI)
Intel® Serial I/O Generic SPI (GSPI) Controllers
Enhanced Serial Peripheral Interface (eSPI)
Real Time Clock (RTC)
8254 Timers
High Precision Event Timer (HPET)
Intel® LPSS Inter-Integrated Circuit (I2C) Controllers
Host System Management Bus (SMBus) Controller
System Management Interface and SMLink
System Management
Intel® Serial I/O Universal Asynchronous Receiver/Transmitter (UART) Controllers
Testability
SoC Pin Location
Security Technologies
Branch Monitoring Counters
Intel® Advanced Encryption Standard New Instructions (Intel® AES-NI)
Perform Carry-Less Multiplication Quad Word (PCLMULQDQ) Instruction
Intel® Secure Key
Execute Disable Bit
Boot Guard Technology
Intel® Supervisor Mode Execution Protection (SMEP)
Intel® Supervisor Mode Access Protection (SMAP)
Intel® Secure Hash Algorithm Extensions (Intel® SHA Extensions)
User Mode Instruction Prevention (UMIP)
Read Processor ID (RDPID)
Functional Description
Configurable GPIO Voltage
GPIO Buffer Impedance Compensation via SD3_RCOMP
Programmable Hardware Debouncer
Integrated Pull-ups and Pull-downs
SCI / SMI# and NMI
Timed GPIO (TIME_SYNC)
GPIO Blink (BK) and Serial Blink (SBK)
Interrupt / IRQ via GPIO Requirement
Native Function and TERM Bit Setting
Virtual GPIO (vGPIO)
DC Specifications
Display Port* Specification
HDMI* Specifications
embedded Display Port* Specifications
16550 8-bit Addressing - Debug Driver Compatibility
SVID AC Specifications
MIPI* DSI Specification
Memory Specifications
MIPI* CSI Specifications
CMOS DC Specifications
GTL and Open Drain DC Specification
PECI DC Characteristics
Features Supported
Interrupt Generation
PCI Express* Power Management
Dynamic Link Throttling
Port 8xh Decode
Separate Reference Clock with Independent SSC (SRIS)
Advanced Error Reporting
Single- Root I/O Virtualization (SR- IOV)
SERR# Generation
Hot-Plug
PCI Express* Lane Polarity Inversion
PCI Express* Controller Lane Reversal
Precision Time Measurement (PTM)
Integrated Connectivity (CNVi)
Integrated Connectivity (CNVi) is a general term referring to a family of connectivity solutions.
Below is the summary of the CNVi technology. For more information, refer to Features Supported and Connectivity Integrated (CNVi).
- Digital Integration of Wireless connectivity functionality
- Wi-Fi* and Bluetooth*
- Support 802.11ac 2x2 160 MHz bandwidth
- Support 802.11ax 2x2 160 MHz bandwidth
- Support Bluetooth 4.2, 5.0
- BT support via USB
- Support connectivity processing subsystems for:
- Wi-Fi*, as a PCIE device through connection to internal fabric.
- Bluetooth*, with USB2 connection. USB2 is connected on-die to XHCI controller thru internal UTMI bridge.
- Multi-Function UART (MFUART), with one UART connected on-die to Programmable Services Engine and two UART having direct connection to GPIO pins for WiGig and LTE co-existence.
- Support Hammock Harbor time synchronization for Wi-Fi* only, no support for BT.
- Support swappable M.2 for integrated or discrete CNV module.