Intel® Pentium® Silver and Intel® Celeron® Processors
Datasheet, Volume 1 of 2
ID | Date | Version | Classification |
---|---|---|---|
633935 | 12/27/2022 | Public |
Legal Disclaimer
Revision History
Introduction
Technologies
Power Management
Thermal Management
Memory
Graphics
Display
Imaging
Pin Strap
General Purpose Input and Output (GPIO)
PCH Electrical Specification
CPU Electrical Specifications
Global Device IDs
CPU And Device IDs
Audio, Voice, and Speech
Connectivity Integrated (CNVi)
PCI Express* (PCIe*)
Universal Serial Bus (USB)
Serial ATA (SATA)
Flexible I/O
Storage
Serial Peripheral Interface (SPI)
Intel® Serial I/O Generic SPI (GSPI) Controllers
Enhanced Serial Peripheral Interface (eSPI)
Real Time Clock (RTC)
8254 Timers
High Precision Event Timer (HPET)
Intel® LPSS Inter-Integrated Circuit (I2C) Controllers
Host System Management Bus (SMBus) Controller
System Management Interface and SMLink
System Management
Intel® Serial I/O Universal Asynchronous Receiver/Transmitter (UART) Controllers
Testability
SoC Pin Location
Security Technologies
Branch Monitoring Counters
Intel® Advanced Encryption Standard New Instructions (Intel® AES-NI)
Perform Carry-Less Multiplication Quad Word (PCLMULQDQ) Instruction
Intel® Secure Key
Execute Disable Bit
Boot Guard Technology
Intel® Supervisor Mode Execution Protection (SMEP)
Intel® Supervisor Mode Access Protection (SMAP)
Intel® Secure Hash Algorithm Extensions (Intel® SHA Extensions)
User Mode Instruction Prevention (UMIP)
Read Processor ID (RDPID)
Functional Description
Configurable GPIO Voltage
GPIO Buffer Impedance Compensation via SD3_RCOMP
Programmable Hardware Debouncer
Integrated Pull-ups and Pull-downs
SCI / SMI# and NMI
Timed GPIO (TIME_SYNC)
GPIO Blink (BK) and Serial Blink (SBK)
Interrupt / IRQ via GPIO Requirement
Native Function and TERM Bit Setting
Virtual GPIO (vGPIO)
DC Specifications
Display Port* Specification
HDMI* Specifications
embedded Display Port* Specifications
16550 8-bit Addressing - Debug Driver Compatibility
SVID AC Specifications
MIPI* DSI Specification
Memory Specifications
MIPI* CSI Specifications
CMOS DC Specifications
GTL and Open Drain DC Specification
PECI DC Characteristics
Features Supported
Interrupt Generation
PCI Express* Power Management
Dynamic Link Throttling
Port 8xh Decode
Separate Reference Clock with Independent SSC (SRIS)
Advanced Error Reporting
Single- Root I/O Virtualization (SR- IOV)
SERR# Generation
Hot-Plug
PCI Express* Lane Polarity Inversion
PCI Express* Controller Lane Reversal
Precision Time Measurement (PTM)
Enhanced Intel SpeedStep® Technology
Enhanced Intel SpeedStep® Technology enables OS to control and select P-state. The following are the key features of Enhanced Intel SpeedStep® Technology:
- Multiple frequency and voltage points for optimal performance and power efficiency. These operating points are known as P-states.
- Frequency selection is software controlled by writing to processor MSRs. The voltage is optimized based on the selected frequency and the number of active processor IA cores.
- Once the voltage is established, the PLL locks on to the target frequency.
- All active processor IA cores share the same frequency and voltage. In a multi-core processor, the highest frequency P-state requested among all active IA cores is selected.
- Software-requested transitions are accepted at any time. If a previous transition is in progress, the new transition is deferred until the previous transition is completed.
- The processor controls voltage ramp rates internally to ensure glitch-free transitions.