Intel® Pentium® Silver and Intel® Celeron® Processors
Datasheet, Volume 1 of 2
ID | Date | Version | Classification |
---|---|---|---|
633935 | 12/27/2022 | Public |
Legal Disclaimer
Revision History
Introduction
Technologies
Power Management
Thermal Management
Memory
Graphics
Display
Imaging
Pin Strap
General Purpose Input and Output (GPIO)
PCH Electrical Specification
CPU Electrical Specifications
Global Device IDs
CPU And Device IDs
Audio, Voice, and Speech
Connectivity Integrated (CNVi)
PCI Express* (PCIe*)
Universal Serial Bus (USB)
Serial ATA (SATA)
Flexible I/O
Storage
Serial Peripheral Interface (SPI)
Intel® Serial I/O Generic SPI (GSPI) Controllers
Enhanced Serial Peripheral Interface (eSPI)
Real Time Clock (RTC)
8254 Timers
High Precision Event Timer (HPET)
Intel® LPSS Inter-Integrated Circuit (I2C) Controllers
Host System Management Bus (SMBus) Controller
System Management Interface and SMLink
System Management
Intel® Serial I/O Universal Asynchronous Receiver/Transmitter (UART) Controllers
Testability
SoC Pin Location
Security Technologies
Branch Monitoring Counters
Intel® Advanced Encryption Standard New Instructions (Intel® AES-NI)
Perform Carry-Less Multiplication Quad Word (PCLMULQDQ) Instruction
Intel® Secure Key
Execute Disable Bit
Boot Guard Technology
Intel® Supervisor Mode Execution Protection (SMEP)
Intel® Supervisor Mode Access Protection (SMAP)
Intel® Secure Hash Algorithm Extensions (Intel® SHA Extensions)
User Mode Instruction Prevention (UMIP)
Read Processor ID (RDPID)
Functional Description
Configurable GPIO Voltage
GPIO Buffer Impedance Compensation via SD3_RCOMP
Programmable Hardware Debouncer
Integrated Pull-ups and Pull-downs
SCI / SMI# and NMI
Timed GPIO (TIME_SYNC)
GPIO Blink (BK) and Serial Blink (SBK)
Interrupt / IRQ via GPIO Requirement
Native Function and TERM Bit Setting
Virtual GPIO (vGPIO)
DC Specifications
Display Port* Specification
HDMI* Specifications
embedded Display Port* Specifications
16550 8-bit Addressing - Debug Driver Compatibility
SVID AC Specifications
MIPI* DSI Specification
Memory Specifications
MIPI* CSI Specifications
CMOS DC Specifications
GTL and Open Drain DC Specification
PECI DC Characteristics
Features Supported
Interrupt Generation
PCI Express* Power Management
Dynamic Link Throttling
Port 8xh Decode
Separate Reference Clock with Independent SSC (SRIS)
Advanced Error Reporting
Single- Root I/O Virtualization (SR- IOV)
SERR# Generation
Hot-Plug
PCI Express* Lane Polarity Inversion
PCI Express* Controller Lane Reversal
Precision Time Measurement (PTM)
Intel® Serial I/O Generic SPI (GSPI) Controllers
The PCH implements three generic SPI interfaces to support devices that uses serial protocol for transferring data.
Each interface consists of a clock (CLK), two chip selects (CS) and 2 data lines (MOSI and MISO).
The GSPI interfaces support the following features:
- Support bit rates up to 20 Mbits/s
- Support data size from 4 to 32 bits in length and FIFO depths of 64 entries
- Support DMA with 128-byte FIFO per channel (up to 64-byte burst)
- Full duplex synchronous serial interface
- Support the Motorola’s* SPI protocol
- Operate in master mode only
Acronyms | Description |
---|---|
GSPI | Generic Serial Peripheral Interface |
LTR | Latency Tolerance Reporting |