Jasper Lake EDS Vol1

Datasheet

ID 633935
Date 01/01/2021
Public Content

A newer version of this document is available. Customers should click here to go to the newest version.

Document Table of Contents
DSP

Memory Frequency

In all modes, the frequency of system memory is the lowest frequency of all memory modules placed in the system, as determined through the SPD registers on the memory modules. The system memory controller supports a single DIMM connector per channel. If DIMMs with different latency are populated across the channels, the BIOS will use the slower of the two latencies for both channels. For Dual-Channel modes both channels should have a DIMM connector populated. For Single-Channel mode, only a single channel can have a DIMM connector populated.