Jasper Lake EDS Vol1

Datasheet

ID Date Version Classification
633935 01/01/2021 Public Content

A newer version of this document is available. Customers should click here to go to the newest version.

Document Table of Contents
DSP

Thermal Trip Signal (PCHHOT_N)

The PCH provides PCHHOT_​N signal to indicate that it has exceeded some temperature limit. The limit is set by BIOS. The temperature limit (programmed into the PHL register) is compared to the present temperature. If the present temperature is greater than the PHL value then the pin is asserted.

PCHHOT_​N is an O/D output and requires a Pull-up on the motherboard.

The PCH evaluates the temperature from the thermal sensor against the programmed temperature limit every one second.