THC device address for the bulk write (THC_M_PRT_WR_BULK_ADDR) – Offset 10b4
THC device address for the bulk write
Bit Range | Default | Access | Field Name and Description |
31:0 | 1000h | RW/O | THC device address for the bulk write (THC_M_PRT_WR_BULK_ADDR) THC Device Address for the bulk data write.
The bulk write cycles addresses start from the bulk address defined in THC_M_PRT_WR_BULK_ADDR (default 0x1000) and increment on every packet until the end of the write frame. The bulk write address resumes using the address in THC_M_PRT_WR_BULK_ADDR at the beginning of every write frame.
SW is responsible to program this register correctly, and make sure all resulting touch cycles will not exceed the touch device's bulk address space or roll over. Otherwise, THC's behavior is undefined. Note: For SPI devices, only 24bit addressing space is supported.
Default to 0x1000. |