Wake Alarm Device Expired Timer: AC (WADT_EXP_AC) – Offset 1808 - 1.2 - ID:615146 | Intel® 400 Series Chipset On-Package Platform Controller Hub

Introduction
8254 Timer
Advanced Programmable Interrupt Controller (APIC)
APIC Indirect
CNVi PCI Configuration
DCI PCR
- DCI Control (ECTRL)
EMMC Additional
EMMC Memory Mapped
EMMC PCI Configuration
eMMC PCR
- Dynamic Clock Gating Control (GPPRVRW1)
Enhanced SPI (eSPI) PCI Configuration
eSPI PCR
FIA Configuration PCR
GbE Configuration
GbE Memory Mapped I/O
Generic SPI (GSPI) Additional
Generic SPI (GSPI) DMA Controller
Generic SPI (GSPI) Memory Mapped
GPIO Community 0
GPIO Community 1
GPIO Community 2
GPIO Community 3
GPIO Community 4
GSPI PCI Configuration
High Definition Audio (D31:F3) Memory Mapped I/O
High Definition Audio (D31:F3) PCI Configuration
HPET Memory Mapped
I2C Additional
I2C DMA Controller
I2C Memory Mapped
I2C PCI Congifuration
IDE Redirect PCI Configuration (D22:F2)
Integrated Clock (ICC) Configuration
- CMU_ONE_DWORD25 (cmu_one_dword25)
Intel RST for PCIe Storage (Remapping) PCI Configuration (D24:F0)
Intel RST for PCIe Storage MMIO
Intel(R) Management Engine Interface PCI Configuration
Intel(R) MEI MMIO
- DEVIDLE Control (HECI1_DEVIDLEC)
Intel(R) Trace Hub Configuration
Intel® HD Audio PCR
- Function Configuration (FNCFG)
Interrupt
Interrupt PCR
IO Trap
ISH
ISH PCH Configuration
ISH PCR
- Power Management Control (PMCTL)
Keyboard and Text (KT) Additional Configuration
- Power Management Control and Status (KT_CSXE_PMD_PMCSRBSE_PMCSR)
Keyboard and Text (KT) PCI Configuration (D22:F3)
LPC Configuration
LPC PCR
- General Control And Function Disable (GCFD)
OPI PCR
P2SB PCI Configuration
PCI Express* Port Configuration
PMC I/O Based
PMC Memory Mapped
PMC SSRAM PCI Configuration
Power Management Configuration
Processor Interface Memory
PSF1
PSF2
PSF3
PSF4
PSF5
RTC Indexed
RTC PCR
SATA ABAR
SATA AIDP
- AHCI Index Register (INDEX)
- AHCI Data Register (DATA)
SATA Configuration
SATA Initialization (SIR) Index
SATA MXPBA
- MSI-X Pending Bit Array QW 0 (MXPQW0_DW0)
SATA MXTBA
SDXC (SD Card) PCR
- Dynamic Clock Gating Control (GPPRVRW1)
SDXC Additional Memory Mapped
SDXC Memory Mapped
SDXC PCI Configuration
SMBus Configuration
SMBus I/O and Memory Mapped I/O
SMBus PCR
SMBus TCO I/O
SPI Configuration
SPI Memory Mapped
Thermal Reporting Configuration
Thermal Reporting Memory Mapped
UART Additional Memory Mapped
UART DMA Controller
UART Memory Mapped
UART PCI Configuration
xDCI MMIO Device
xDCI MMIO Global
xDCI PCI Configuration
xHCI Configuration
xHCI Memory Mapped

Wake Alarm Device Expired Timer: AC (WADT_EXP_AC) – Offset 1808

Bit Range	Default	Access	Field Name and Description
31:0	FFFFFFFFh	RW/V	Wake Alarm Device Expired Timer Value for AC Mode (WADT_EXP_AC_VAL) This field contains the 32-bit wake alarm device "Expired Timer" value (granularity 1s) for AC power. The timer begins decrementing after switching from DC to AC power. In the case where the WADT_AC timer has already expired while the platform was on DC power, this timer only decrements while operating on AC power. So if the power source switches back to DC power, the timer will stop (but not reset). When AC power returns, the timer will again begin decrementing. Note: This timer will only begin decrementing under the conditions described above if this field has been configured for something other than its default value of FFFFFFFFh (i.e. FFFFFFFFh = disabled). Upon expiration of this timer: - If on AC power, GPE0b_STS.WADT_STS will be set. This status bit being set will generate a host wake if GPE0b_EN.WADT_EN is 1. - BOTH the AC and DC Expired Timers return to their defaults value of FFFFFFFFh. This bit is reset by DSW_PWROK de-assertion.

Bit Range

Default

Access

Field Name and Description

31:0

FFFFFFFFh

RW/V

Wake Alarm Device Expired Timer Value for AC Mode (WADT_EXP_AC_VAL)

This field contains the 32-bit wake alarm device "Expired Timer" value (granularity 1s) for AC power. The timer begins decrementing after switching from DC to AC power. In the case where the WADT_AC timer has already expired while the platform was on DC power, this timer only decrements while operating on AC power. So if the power source switches back to DC power, the timer will stop (but not reset). When AC power returns, the timer will again begin decrementing.

Note: This timer will only begin decrementing under the conditions described above if this field has been configured for something other than its default value of FFFFFFFFh (i.e. FFFFFFFFh = disabled).

Upon expiration of this timer:

- If on AC power, GPE0b_STS.WADT_STS will be set. This status bit being set will generate a host wake if GPE0b_EN.WADT_EN is 1.

- BOTH the AC and DC Expired Timers return to their defaults value of FFFFFFFFh.

This bit is reset by DSW_PWROK de-assertion.

Wake Alarm Device Expired Timer: DC (WADT_EXP_DC)

Wake Alarm Device Timer: DC (WADT_DC) Wake Alarm Device Expired Timer: DC (WADT_EXP_DC)